Description
The device linear regulator is designed to provide the transient peaks up to 2A sourcing or sinking capability for DDR(Double Data Rate) SDRAM bus termination application. The output voltage can track half of input power by two external voltage divider resistors.

Features
 1. Power MOSFET Integrated
 2. Low Output Voltage Offset
 3. Current Limiting Protection
 4. Thermal Shutdown Protection
 5. Adjusted Output by External Resistors
 6. Shutdown for Standby or Suspend Mode

DESCRIPTION
These line drivers are PIN compatible with 26LS31 in applications where PIN 4 = 5V and PIN 12 = GND. Internal clamp diodes allow trouble-free operation when driving cable lengths exceeding 100m. Split supplies are provided to minimize standby power dissipation in high voltage applications. The logic should be powered from a regulated 5V supply at the VccBias PIN. The output stages may then be powered by a separate supply at VccDrivers, up to 30V.

FEATURES
• Supply Voltage Range 3.5V to 30V
• Operation to 800KHz
• CMOS and TTL Compatible Inputs
• Separate logic bias and driver supply PINs
• Optional single supply operation for moderate power applications
• High Impedance Buffered Inputs with Hysteresis may be driven directly by phototransistors
• Tri-State outputs
• 80mA peak SINK/SOURCE current
• Outputs Protected by Thermal Shut-Down

APPLICATIONS
• Optical Encoders
• Industrial Controls

Description
M/A-COM’s SW-226/227/228-PIN are GaAs MMIC SPDT switches packaged in lead-free, surface mount CR-2 ceramic style packages. The SW-226- PIN is a terminated SPDT. The SW-227-PIN offers high isolation. The SW-228-PIN offers low insertion loss. This ceramic switch platform has a common footprint for all three designs. The CR-2 package is hermetically sealed, making these switches ideal for space, military radios, and other environmentally harsh applications.

Features
• Terminated (SW-226-PIN), High Isolation (SW-227-PIN), Low Loss (SW-228-PIN)
• Fast Switching Speed: 6 nS Typical
• Ultra Low DC Power Consumption
• Lead-Free 7-Lead Ceramic Package
• RoHS* Compliant and 260°C Reflow Compatible

Features
• Low Insertion Loss, 0.5 dB Typical
• Integral TTL Driver
• Low DC Power Consumption
• 50 Ohm Nominal Impedance
• MIL-STD-883 screening available

Features
• Low Insertion Loss, 1.0 dB Typical
• Fast Switching Speed, 20 nS Typical
• Ultra Low DC Power Consumption, 0.12 mA Typical
• Integral TTL (SW-233) or CMOS (SW-236) Driver
• 50 Ohm Nominal Impedance
• MIL-STD-883 screening available

Features
•  Low Insertion Loss, 1.0 dB Typical
•  Fast Switching Speed, 20 nS Typical
•  Ultra Low DC Power Consumption, 0.07 mA Typical
•  Integral TTL (SW-215) or CMOS (SW-216) Driver
•  50 Ohm Nominal Impedance
•  MIL-STD-883 screening available

Description
The BL93C46 provides 1024 bits of serial electrically erasable programmable read only memory (EEPROM) organized as 64 words of 16 bits each, when the ORG PIN is connected to VCC and 128 words of 8 bits each when it is tied to ground. TheBL93C46 is available in space-saving 8-lead PDIP, 8-lead TSSOP and 8-lead JEDEC SOIC packages.

Features
➤ Three-wire Serial Interface
➤ VCC = 1.8V to 5.5V
➤ 2 MHz Rate (5V) Compatibility
➤ Self-timed Write Cycle (5 ms max)
➤ 1 Million Write Cycles guaranteed
➤ Data Retention > 100 Years
➤ 8-lead PDIP, 8-lead JEDEC SOIC and 8-lead TSSOP Packages

Description
M/A-COM’s SW-226/227/228-PIN are GaAs MMIC SPDT switches packaged in lead-free, surface mount CR-2 ceramic style packages. The SW-226- PIN is a terminated SPDT. The SW-227-PIN offers high isolation. The SW-228-PIN offers low insertion loss. This ceramic switch platform has a common footprint for all three designs. The CR-2 package is hermetically sealed, making these switches ideal for space, military radios, and other environmentally harsh applications.

Features
• Terminated (SW-226-PIN), High Isolation (SW-227-PIN), Low Loss (SW-228-PIN)
• Fast Switching Speed: 6 nS Typical
• Ultra Low DC Power Consumption
• Lead-Free 7-Lead Ceramic Package
• RoHS* Compliant and 260°C Reflow Compatible

Description
M/A-COM’s SW-226/227/228-PIN are GaAs MMIC SPDT switches packaged in lead-free, surface mount CR-2 ceramic style packages. The SW-226- PIN is a terminated SPDT. The SW-227-PIN offers high isolation. The SW-228-PIN offers low insertion loss. This ceramic switch platform has a common footprint for all three designs. The CR-2 package is hermetically sealed, making these switches ideal for space, military radios, and other environmentally harsh applications.

Features
• Terminated (SW-226-PIN), High Isolation (SW-227-PIN), Low Loss (SW-228-PIN)
• Fast Switching Speed: 6 nS Typical
• Ultra Low DC Power Consumption
• Lead-Free 7-Lead Ceramic Package
• RoHS* Compliant and 260°C Reflow Compatible

Features

•  Low Insertion Loss, 1.0 dB Typical

•  Fast Switching Speed, 20 nS Typical

•  Ultra Low DC Power Consumption, 0.07 mA Typical

•  Integral TTL (SW-215) or CMOS (SW-216) Driver

•  50 Ohm Nominal Impedance

•  MIL-STD-883 screening available