ICS541MT データシートの表示（PDF） - Integrated Circuit Systems

部品番号

コンポーネント説明

メーカー

ICS541MT

PLL Clock Divider

Integrated Circuit Systems 

PRELIMINARY INFORMATION

ICS541

PLL Clock Divider

Description

The ICS541 is a cost effective way to produce a

high quality clock output divided from a clock

input. The chip accepts a clock input up to

135 MHz at 3.3 V, and by using proprietary Phase

Locked Loop (PLL) techniques, produces a divide

by 1, 2, 4, or 8 of the input clock. There are two

outputs on the chip, one being a low-skew divide

by two of the other. So, for instance, if an 80 MHz

input clock is used, the ICS541 can produce low

skew 80 MHz and 40 MHz clocks, or 40 MHz

and 20 MHz clocks, or 20 MHz and 10MHz

clocks. The chip has an all-chip power down mode

that stops the outputs low, and an OE pin that tri-

states the outputs.

The ICS541 is a member of the ICS

ClockBlocks™ family of clock building blocks.

See the ICS542 and ICS543 for other clock

dividers, and the ICS300, 501, 502, and 503 for

clock multipliers.

Block Diagram

VDD GND

Features

• Packaged in 8 pin SOIC

• Low cost clock divider

• Low skew (500ps) outputs. One is ÷ 2 of other.

• Easy to use with other generators and buffers

• Input clock frequency up to 135 MHz at 3.3 V

• Input clock frequency up to 156 MHz at 5.0 V

• Tolerant of poor input clock duty cycle, jitter.

• Output clock duty cycle of 45/55

• Power Down turns off chip

• Output Enable

• Full CMOS clock swings with 25mA drive

capability at TTL levels

• Advanced, low power CMOS process

• Operating voltages of 3.0 to 5.5 V

2

S1, S0

Output

Buffer

CLK

PLL,

Divider and ÷2

Selection

Circuitry

Input Clock

Output

Buffer

CLK/2

OE (both outputs)

MDS 541 B

1

Revision 082500

Printed 11/14/00

Integrated Circuit Systems, Inc. •525 Race Street• San Jose•CA• 95126• (408)295-9800tel • www.icst.com

Share Link: