DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

MF612A データシートの表示(PDF) - YCL Electronics

部品番号
コンポーネント説明
メーカー
MF612A
YCL
YCL Electronics  YCL
MF612A Datasheet PDF : 13 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
Product Specification
MF612A
1. Introduction:
The In-Line Microfilter has been specifically designed to implement the functionality of low
pass filter in G.lite system. G.lite technology is similar to full rate ADSL in using DMT
technology but operates at a lower data rate of up to 1.5 Mbps downstream and 512 kbps
upstream, depending on line conditions and lengths.
For POTS voice band service, the low pass filter provide protection from ADSL signal which
may impact through non-line or other effects remote devices ( handset, fax, voice band
modem etc. ) and central office operation. For ADSL signal, it also provide protection from the
high frequency transients and impedance effect that occur during POTS operation ( ringing
transients, on-hook, off-hook transients and so on ). Because the Microfilter connects directly
to the subscriber loop media, it must also provide some protection for externally induced line
hits or faults which could damage any attached equipment or endanger humans interacting
with the installed equipment. The circuit protection will be provided mostly by standard central
office line protection means and additional protection measures built into POTS filter to
protect against line overstress which could damage the filter itself.
2. Reference:
Ref. 1 : ETS 300 001
Attachments to the Public Switched Telephone Network
(PSTN); General technical requirements for equipment
Ref. 2 : ANSI T1.413
connected to analogue subscriber interface in the PSTN.
Network and Customer Installation Interfaces
Asymmetric Digital Subscriber Line (ADSL) Metallic
Interface
Ref. 3 : ITU-T G.992.1
Asymmetrical Digital Subscriber Line (ADSL) Transceiver
Ref. 4 : T1E1.4/2001-007R3 In-Line Filter Standard
Ref. 5 : ITU-T K.21
Resistibility of Telecommunication Equipment Installed
in Customer Premises to Overvoltages and Overcurrents
Ref. 6 : ITU-T K.44
Resistibility tests for telecommunication equipment exposed
to overvoltages and overcurrentsBasic Recommendation
Data sheet subject to change without notice
RDPS-MF039(R0)02/22/2002
SHEET 3 OF 13

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]