PM4314-RI データシートの表示（PDF） - PMC-Sierra

部品番号

コンポーネント説明

メーカー

PM4314-RI

QUAD T1/E1 LINE INTERFACE DEVICE

PMC-Sierra 

PM4314 QDSX

DATA SHEET

PMC-950857

ISSUE 5

QUAD T1/E1 LINE INTERFACE DEVICE

3 REFERENCES

1. American National Standard for Telecommunications, ANSI T1.102-1992 -

"Digital Hierarchy - Electrical Interfaces".

2. American National Standard for Telecommunications, ANSI T1.107-1991 -

“Digital Hierarchy - Formats Specifications”.

3. American National Standard for Telecommunications, ANSI T1.403-1989 -

"Carrier to Customer Installation - DS1 Metallic Interface Specification".

4. American National Standard for Telecommunications, ANSI T1.408-1990 -

"Integrated Services Digital Network (ISDN) Primary Rate - Customer

Installation Metallic Interfaces Layer 1 Specification".

5. Bell Communications Research, TR-TSY-000009 - "Asynchronous Digital

Multiplexes Requirements and Objectives", Issue 1, May, 1986.

6. Bell Communications Research, TA-TSY-000147 - "DS1 Rate Digital Service

Monitoring Unit Functional Specification", Issue 1, October, 1987.

7. Bell Communications Research, TR-TSY-000170 - "Digital Cross-Connect

System (DCS) - Requirements and Objectives", Issue 1, November, 1985.

8. Bell Communications Research, TR-TSY-000191 - "Alarm Indication Signal

Requirements and Objectives" Issue 1, May 1986.

9. Bell Communications Research, TR-TSY-000303 - "Integrated Digital Loop

Carrier System Generic Requirements, Objectives, and Interface", Issue 1,

Rev. 1, December, 1987.

10. Bell Communications Research, TR-TSY-000312 - "Functional Criteria for the

DS1 Interface Connector", Issue 1, March, 1988.

11. Bell Communications Research, TR-TSY-000499 - "Transport Systems

Generic Requirements (TSGR): Common Requirement", Issue 3, December,

1989.

12. AT&T, TR 43801 - "Digital Channel Bank - Requirements and Objectives",

November, 1982.

PROPRIETARY AND CONFIDENTIAL TO PMC-SIERRA, INC., AND FOR ITS CUSTOMERS’ INTERNAL USE 6

Share Link: