MAX4522CSE データシートの表示（PDF） - Maxim Integrated
部品番号
コンポーネント説明
メーカー
MAX4522CSE Datasheet PDF : 15 Pages
| |||
Quad, Low-Voltage, SPST Analog Switches
ABSOLUTE MAXIMUM RATINGS
Voltages Referenced to GND
V+.....................................................................-0.3V to +13.0V
V- .....................................................................-13.0V to +0.3V
V+ to V- ............................................................-0.3V to +13.0V
All Other Pins (Note 1) ..........................(V- - 0.3V) to (V+ + 0.3V)
Continuous Current into Any Terminal..............................±10mA
Peak Current into Any Terminal
(pulsed at 1ms,10% duty cycle)...................................±20mA
ESD per Method 3015.7 ..................................................>2000V
Continuous Power Dissipation (TA = +70°C) (Note 2)
Plastic DIP (derate 10.53mW/°C above +70°C) ..........842mW
Narrow SO (derate 8.70mW/°C above +70°C) ............696mW
QSOP (derate 9.52mW/°C above +70°C) ....................762mW
CERDIP (derate 10.00mW/°C above +70°C) ...............800mW
TSSOP (derate 6.7mW/°C above +70°C) ....................457mW
QFN (derate 16.9mW/°C above +70°C) ....................1349mW
Operating Temperature Ranges
MAX452_C_E ......................................................0°C to +70°C
MAX452_E_E ...................................................-40°C to +85°C
MAX452_MJE ................................................-55°C to +125°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Note 1: Signals on NC_, NO_, COM_, or IN_ exceeding V+ or V- are clamped by internal diodes. Limit forward-diode current to maxi-
mum current rating.
Note 2: All leads are soldered or welded to PC boards.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS—Dual Supplies
(V+ = +4.5V to +5.5V, V- = -4.5V to -5.5V, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.)
PARAMETER
ANALOG SWITCH
Analog Signal Range
COM_ to NO_, COM_ to NC_
On-Resistance
COM_ to NO_, COM_ to NC_
On-Resistance Match Between
Channels (Note 5)
COM_ to NO_, COM_ to NC_
On-Resistance Flatness
(Note 6)
SYMBOL
CONDITIONS
VCOM_, VNO_,
VNC_
RON
(Note 4)
V+ = 5V, V- = -5V,
VCOM_ = ±3V, ICOM_ = 1mA
ΔRON
V+ = 5V, V- = -5V,
VCOM_ = ±3V, ICOM_ = 1mA
RFLAT(ON)
V+ = 5V, V- = -5V,
VCOM_ = ±3V, ICOM_ = 1mA
NO_, NC_ Off-Leakage Current
(Note 7)
INO_(OFF),
INC_(OFF)
VV+CO=M5_.=5V±, V4.-5=V,-5V.N5_V,= ±4.5V
COM_ Off-Leakage Current
(Note 7)
ICOM_(OFF)
VV+CO=M5_.=5V±, 4V.-5=V,-V5N.5_V=, ± 4.5V
COM_ On-Leakage Current
(Note 7)
ICOM_(ON)
V+ = 5.5V, V- = -5.5V,
VCOM_ = ±4.5V
TA
C, E, M
+25°C
C, E, M
+25°C
C, E, M
+25°C
C, E, M
+25°C
C, E
M
+25°C
C, E
M
+25°C
C, E
M
MIN TYP
(Note 3)
MAX UNITS
V-
65
1
7
-1
0.01
-10
-100
-1
0.01
-10
-100
-2
0.01
-20
-200
V+ V
100
Ω
125
4
Ω
6
12
Ω
15
1
10 nA
100
1
10 nA
100
2
20 nA
200
2 _______________________________________________________________________________________
Share Link: 