SK100E116 データシートの表示（PDF） - Semtech Corporation

部品番号

コンポーネント説明

メーカー

SK100E116

Quint Differential Line Receiver

Semtech Corporation 

SK10/100E116

TEST AND MEASUREMENT PRODUCTS

AC Characteristics (continued)

Notes:

1. 10EL circuits are designed to meet the DC specifications shown in the table after thermal equilibrium has

been established. The circuit is in a test socket or mounted on a printed circuit board and transverse

airflow greater than 500 lfpm is maintained. Outputs are terminated through a 50Ω resistor to VCC–2.0V.

2. 100K circuits are designed to meet the DC specification shown in the table where transverse airflow

greater than 500 lfpm is maintained.

3. Minimum input swing for which AC parameters guaranteed.

4. Voltages referenced to VCC = 0V (ECL mode).

5. Within device skew is defined as identical transition on similar path through a device.

6. Duty cycle is defined only for differential operation when the delays are measured from the crosspoint of

the inputs to the crosspoints of the outputs.

7. For standard ECL DC Specifications, refer to the ECL Logic Family Standard DC Specifications Data

Sheet.

8. For part ordering description, see HPP Part Ordering Information Date Sheet.

Ordering Information

Ordering Code

SK10E116PJ

SK10E116PJT

SK100E116PJ

SK100E116PJT

Package ID

28-PLCC

28-PLCC

28-PLCC

28-PLCC

Application Notes

AN1002 - Interfacing Between ECL / LVECL / PECL / LVPECL - to - TTL / LVTTL / CMOS / LVCMOS

AN1003 - Termination Techniques for ECL / LVECL / PECL / LVPECL Devices

AN1005 - Using ECL / LVECL Devices as PECL / LVPECL

AN1006 - Designing with 10K and 100K ECL / PECL Devices

Contact Information

Division Headquarters

10021 Willow Creek Road

San Diego, CA 92131

Phone: (858) 695-1808

FAX: (858) 695-2633

Revision 3 / September 5, 2002

Semtech Corporation

Test and Measurement Division

4

Marketing Group

1111 Comstock Street

Santa Clara, CA 95054

Phone: (408) 566-8776

FAX: (408) 566-8759

www.semtech.com

Share Link: