SAA3004T データシートの表示（PDF） - Philips Electronics

部品番号

コンポーネント説明

メーカー

SAA3004T

Remote control transmitter

Philips Electronics 

Philips Semiconductors

Remote control transmitter

Product specification

SAA3004

Output sequence (data format)

The output operation will start when the selected code is found. A burst of pulses, including the latched address and

command codes, is generated at the output REMO as long as a key is pressed. The format of the output pulse train is

given in Figs 2 and 3. The operation is terminated by releasing the key or if more than one key is pressed at the same

time. Once a sequence is started, the transmitted words will always be completed after the key is released.

The toggle bits T0 and T1 are incremented if the key is released for a minimum time tREL (see Fig.4).

The toggle bits remain unchanged within a multiple key-stroke sequence.

REF = reference time; T0 and T1 = toggle bits; S0, S1 and S2 = system address; A, B, C, D, E and F = command bits

(a) flashed mode: transmission with 2 toggle bits and 3 address bits, followed by 6 command bits (pulses are flashed).

(b) modulated mode: transmission with reference time, 1 toggle bit and 3 address bits, followed by 6 command bits (pulses are modulated).

Fig.2 Data format of REMO output; .

(1) Flashed pulse.

(2) Modulated pulse (tPW = (5 × tM) + tMH.

August 1982

Fig.3 REMO output waveform.

5

Share Link: