MC-4516CD641ES-A10L データシートの表示（PDF） - NEC => Renesas Technology
部品番号
コンポーネント説明
メーカー
MC-4516CD641ES-A10L
NEC => Renesas Technology
MC-4516CD641ES-A10L Datasheet PDF : 16 Pages
| |||
MC-4516CD641ES, 4516CD641PS
DC Characteristics (Recommended Operating Conditions unless otherwise noted)
Parameter
Operating current
Symbol
Test condition
MIN. MAX. Unit Notes
ICC1 Burst length = 1, tRC ≥ tRC(MIN.)
/CAS latency = 2 -A80
560 mA 1
-A10
560
/CAS latency = 3 -A80
560
-A10
Precharge standby current in ICC2P CKE ≤ VIL(MAX.), tCK = 15 ns
5 power down mode
ICC2PS CKE ≤ VIL(MAX.), tCK = ∞
Precharge standby current in ICC2N CKE ≥ VIH(MIN.), tCK = 15 ns, /CS ≥ VIH(MIN.),
non power down mode
Input signals are changed one time during 30 ns.
ICC2NS CKE ≥ VIH(MIN.), tCK = ∞, Input signals are stable.
Active standby current in
ICC3P CKE ≤ VIL(MAX.), tCK = 15 ns
power down mode
ICC3PS CKE ≤ VIL(MAX.), tCK = ∞
Active standby current in
non power down mode
ICC3N CKE ≥ VIH(MIN.), tCK = 15 ns, /CS ≥ VIH(MIN.),
Input signals are changed one time during 30 ns.
ICC3NS CKE ≥ VIH(MIN.), tCK = ∞, Input signals are stable.
Operating current
ICC4 tCK ≥ tCK(MIN.), IO = 0 mA
/CAS latency = 2 -A80
(Burst mode)
-A10
560
8 mA
8
160 mA
64
40 mA
32
240 mA
160
700 mA 2
560
/CAS latency = 3 -A80
820
5 CBR (Auto) refresh current
ICC5
tRC ≥ tRC(MIN.)
-A10
/CAS latency = 2 -A80
-A10
680
1,040 mA 3
1,040
/CAS latency = 3 -A80
1,040
5 Self refresh current
ICC6 CKE ≤ 0.2 V
-A10
1,040
16 mA
Input leakage current
II(L) VI = 0 to 3.6 V, All other pins not under test = 0 V
– 8 +8 µA
Output leakage current
IO(L) DOUT is disabled, VO = 0 to 3.6 V
–3 +3 µA
High level output voltage
VOH IO = – 4.0 mA
2.4
V
Low level output voltage
VOL IO = + 4.0 mA
0.4 V
Notes 1. ICC1 depends on output loading and cycle rates. Specified values are obtained with the output open. In
addition to this, ICC1 is measured on condition that addresses are changed only one time during tCK(MIN.).
2. ICC4 depends on output loading and cycle rates. Specified values are obtained with the output open. In
addition to this, ICC4 is measured on condition that addresses are changed only one time during tCK(MIN.).
3. ICC5 is measured on condition that addresses are changed only one time during tCK(MIN.).
6
Data Sheet M14014EJ5V0DS00
Share Link: