TGL41-10 データシートの表示（PDF） - General Semiconductor
部品番号
コンポーネント説明
メーカー
TGL41-10 Datasheet PDF : 2 Pages
| |||
TGL41-6.8 THRU TGL41-200CA
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
Breakdown Voltage - 6.8 to 200 Volts Peak Pulse Power - 400 Watts
DO-213AB
SOLDERABLE ENDS
1st BAND
D2
D1=
0.105
0.095
(2.67)
(2.41)
0.022 (0.56)
0.018 (0.46)
0.205 (5.2)
0.185(4.7)
D2
=
D1
+
-
0
0.008
(0.20)
1st band denotes type and positive end (cathode)
Dimensions in inches
and
(millimeters)
FEATURES
♦ Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
♦ For surface mounted applications
♦ Glass passivated junction
♦ Excellent clamping capability
♦ Low incremental surge resistance
♦ Fast response time typically less than 1.0ps from 0 Volts
to V(BR) for unidirectional and 5.0ns for bidirectional types
♦ 400W peak pulse capability with a 10/1000µs waveform,
repetition rate (duty cycle): 0.01%
♦ For devices with V(BR)≥10V, ID are typically less
than 1.0µA
♦ High temperature soldering guaranteed:
250°C/10 seconds at terminals
MECHANICAL DATA
Case: JEDEC DO-213AB molded plastic body over
passivated junction
Terminals: Solder plated, solderable per MIL-STD-750,
Method 2026
Polarity: Blue bands denotes positive end
(cathode) for unidirectional and a yellow band in
the middle for bidirectional types
Mounting Position: Any
Weight: 0.116 gram, 0.0046 ounce
DEVICES FOR BIDIRECTIONAL APPLICATIONS
For bidirectional applications use suffix letters C or CA for types TGL41-10 thru TGL41-200A (e.g. TGL41-10C, TGL41-200CA).
Electrical characteristics apply in both directions.
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
RATINGS
Peak pulse power dissipation with a
10/1000µs waveform (NOTE 1, FIG. 1)
Steady state power dissipation at TT=75°C (NOTE 2)
Peak pulse current with a 10/1000µs waveform
(NOTE 1, FIG. 3)
Peak forward surge current, 8.3ms single half
sine-wave superimposed on rated load for unidirectional only
(JEDEC Method) (NOTE 3)
Maximum instantaneous forward voltage at 25A (NOTE 3)
for unidirectional only
Operating junction and storage temperature range
SYMBOL
PPPM
PM(AV)
IPPM
IFSM
VF
TJ, TSTG
VALUE
Minimum 400
1.0
SEE TABLE 1
40.0
3.5
-55 to +150
UNITS
Watts
Watt
Amps
Amps
Volts
°C
NOTES:
(1) Non-repetitive current pulse, per Fig. 3 and derated above TA=25°C per Fig. 2
(2) Mounted on copper pads to each terminal of 0.31 in2 (8.0 mm2) per Fig. 5
(3) Measured at 8.3ms single half sine-wave or equivalent square wave duty cycle=4 pulses per minute maximum
Share Link: 