SL2418 データシートの表示（PDF） - System Logic Semiconductor

部品番号

コンポーネント説明

メーカー

SL2418

Telephone Tone Ringer with Bridge Diode

System Logic Semiconductor 

SL2418

Telephone Tone Ringer with Bridge Diode

The SL2418 is a monolithic integrated circuit telephone tone ringer

with bridge diode, when coupled with an appropriate transducer, it

replaces the electro-mechanical bell. The device is designed for use

with either a piezo transducer or an inexpensive transformer coupled

speaker to produce a pleasing tone composed of a high frequency (fR)

alternating with a low frequency (fL) resulting in a warble frequency.

The supply voltage is obtained from the AC ring signal and the circuit

is designed so that noise on the line or variation of the ringing signal

can not affect correct operation of the device.

• On chip high voltage full wave diode bridge rectifier

• Low current consumption, in order to allow the parallel operation

of the 4 devices

• Low external component count

• Tone and switching frequencies adjustable by external

components

• High noise immunity due to built-in voltage-current hysteresis

• Activation voltage adjustable

• Internal zener diodes to protect against over voltages

• Ringer impedance adjustable with external components

ORDERING INFORMATION

SL2418N Plastic

SL2418D SOIC

TA = -20° to 70° C

for package

PIN ASSIGNMENT

BLOCK DIAGRAM

SLS

System Logic

Semiconductor

Share Link: