ATS622LSB
TRUE ZERO-SPEED,
GEAR-TOOTH SENSOR
MECHANICAL INFORMATION
Component
Sensor Face
Plastic Housing
Leads
Lead Finish
Lead Pull
Material
Thermoset epoxy
Thermoplastic PBT
Copper
90/10 tin/lead solder plate
—
Function
Maximum temperature
264 psi deflection temp. (DTUL)
66 psi deflection temp. (DTUL)
Approximate melting temperature
—
—
—
Units
170°C*
204°C
216°C
225°C
—
†
8N
*Temperature excursions to 225 °C for 2 minutes or less are permitted.
† All industry-accepted soldering techniques are permitted for these modules provided the indicated maximum tempera-
ture for each component (e.g., sensor face, plastic housing) is not exceeded. Reasonable dwell times, which do not cause
melting of the plastic housing, should be used.
Sensor location (in millimeters)
(sensor location relative to package center is the design objective)
2.2 mm
A
Dwg. MH-018-4 mm
Lead cross section (in millimeters)
0.48
0.36
0.41
NOM.
0.44
0.35
0.38
NOM.
0.0076
MIN. PLATING
THICKNESS
Dwg. MH-019A mm
Allegro
www.allegromicro.com
11