HN58X2402SFPI データシートの表示（PDF） - Hitachi -> Renesas Electronics

部品番号

コンポーネント説明

メーカー

HN58X2402SFPI

Two-wire serial interface 2k EEPROM (256-word × 8-bit) 4k EEPROM (512-word × 8-bit)

Hitachi -> Renesas Electronics 

HN58X2402SI/HN58X2404SI

Functional Description

Start Condition

A high-to-low transition of the SDA with the SCL high is needed in order to start read, write operation.

(See start condition and stop condition)

Stop Condition

A low-to-high transition of the SDA with the SCL high is a stop condition. The stand-by operation starts

after a read sequence by a stop condition. In the case of write operation, a stop condition terminates the

write data inputs and place the device in a internally-timed write cycle to the memories. After the

internally-timed write cycle which is specified as tWC, the device enters a standby mode. (See write cycle

timing)

Start Condition and Stop Condition

SCL

SDA

(in)

Start condition

Stop condition

9

Share Link: