DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

ZXBM2001(2002) データシートの表示(PDF) - Zetex => Diodes

部品番号
コンポーネント説明
メーカー
ZXBM2001
(Rev.:2002)
Zetex
Zetex => Diodes Zetex
ZXBM2001 Datasheet PDF : 8 Pages
1 2 3 4 5 6 7 8
ZXBM2001
ZXBM2002 ZXBM2003
Locked Rotor timing capacitor (CONT).
The CLCK timing periods are determined by the
following equations:
VTHH × CLCK
Tlock =
ILCKC
(VTHH VTHL) × CLCK
Toff =
ILCKD
(VTHH VTHL) × CLCK
Ton =
ILCKC
Where VTHH and VTHL are the CLCK pin threshold
voltages and ILCKC and ILCKD are the charge and
discharge currents.
9. PH2 - External transistor driver
10. PH1 - External transistor driver
These are the Phase drive outputs and are open
darlington emitter followers designed to provide up to
80mA of drive to external transistors as shown in the
Application circuits following. The external transistors
in turn drive the fan motor windings.
Lock and FG Timing Waveform:
As these threshold voltages are nominally set to
VTHH=2V and VTHL=1V the equations can be simplified
as follows:
2 × CLCK
Tlock = ILCKC
CLCK
Ton = ILCKC
CLCK
Toff = ILCKD
8. CPWM - Sets PWM frequency
This pin has an external capacitor attached to set the
PWM frequency for the Phase drive outputs. A
capacitor value of 0.15nF will provide a PWM
frequency of typically 24kHz.
The CLCK timing period (Tpwm) is determined by the
following equation:
Lock Timing Example:
(VTHH VTHL) × CPWM (VTHH VTHL) × CPWM
Tpwm =
IPWMC
+
IPWMD
Where VTHH and VTHL are the CPWM pin threshold
voltages and IPWMC and IPWMD are the charge and
discharge currents.
As these threshold voltages are nominally set to
VTHH=2V and VTHL=1V the equations can be simplified
as follows:
CPWM CPWM
Tpwm = IPWMC + IPWMD
Using the equation previously described and to be
found under the CLCK pin description:
2 × CLCK
Tlock = ILCKC
CLCK
Ton = ILCKC
CLCK
Toff = ILCKD
Using a value of CLCK = 1.0uF together with the values
of ILCKC and ILCKD to be found in the Electrical
Characteristics we can derive the following timings for
operation at 12V and 25°C.
2 × 1.0F
Tlock = 2.8A = 0.714s
1.0F
Toff = 0.28A = 3.6s
2 × 1.0F
Ton = 2.8A = 0.36s
ISSUE 1 - APRIL 2002
5

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]