TSH110ILT データシートの表示（PDF） - STMicroelectronics

部品番号

コンポーネント説明

メーカー

TSH110ILT

Wide band low noise operational amplifiers

STMicroelectronics 

Absolute maximum ratings and operating conditions TSH110-TSH111-TSH112-TSH113-TSH114

1

Absolute maximum ratings and operating conditions

Table 1. Absolute maximum ratings (AMR

Symbol

Parameter

VCC

Vid

Vi

Toper

Tstg

Tj

Supply voltage (1)

Differential input voltage (2)

Input voltage (3)

Operating free air temperature range

Storage temperature

Maximum junction temperature

Rthjc

Thermal resistance junction to case

SOT23-5

SO-8

SO-14

TSSOP8

TSSOP14

Value

Unit

14

V

±1

V

±6

V

-40 to +85

°C

-65 to +150

°C

150

°C

80

28

°C/W

22

37

32

Rthja

ESD

Thermal resistance junction to ambiant area

SOT23-5

SO-8

SO-14

TSSOP8

TSSOP14

HBM: human body model(4)

MM: machine model(5)

CDM: charged device model(6)

Output short circuit duration (7)

250

157

°C/W

125

130

110

2.0

0.2

kV

1.5

1. All voltage values, except differential voltage, are with respect to network ground terminal.

2. Differential voltages are the non-inverting input terminal with respect to the inverting terminal.

3. The magnitude of input and output voltages must never exceed VCC +0.3V

4. Human body model: A 100pF capacitor is charged to the specified voltage, then discharged through a

1.5kΩ resistor between two pins of the device. This is done for all couples of connected pin combinations

while the other pins are floating.

5. Machine model: A 200pF capacitor is charged to the specified voltage, then discharged directly between

two pins of the device with no external series resistor (internal resistor < 5Ω). This is done for all couples of

connected pin combinations while the other pins are floating.

6. Charged device model: all pins and the package are charged together to the specified voltage and then

discharged directly to the ground through only one pin. This is done for all pins.

7. Short-circuits can cause excessive heating and can result in destructive dissipation.

Table 2. Operating conditions

Symbol

Parameter

Value

Unit

VCC

Supply voltage

Vicm

Common mode input voltage range

5 to 12

V

VCC-+1.5 to VCC+-1.5

V

2/15

Share Link: