HT80 データシートの表示（PDF） - Unspecified

部品番号

コンポーネント説明

メーカー

HT80

turbocharger

Unspecified 

HC5A/HX80/82/83/85/HT4B/4C/80 Service Repair Manual

Introduction

About the Manual

The procedures in this manual were developed to instruct in the correct overhaul of the designated

turbochargers for optimum performance and minimum maintenance operation.

How to Use the Manual

The manual is split into sections designed to provide service information in a logical sequence. The manual

contains links to help the user navigate between relevant sections. Users who are unfamilier with navigating in

PDF documents are refered to Navigating in PDF documents in the Adobe® Acrobat® Reader™ help file.

Contents is an interactive page with links to all the sections. It can be accessed from any page

in the manual by clicking this icon.

Section 1 defines the layout of the manual, introduces the reader to the operation of the turbocharger

and presents important installation guidelines.

Sections 2, 3 and 4 concentrate on Turbocharger Component Identification, Troubleshooting and

Diagnosis, Component Testing and Replacement.

Section 5 identifies the Service and Overhaul procedures to be followed in the unlikley event of a

major turbocharger malfunction.

Section 6 quantifies build data to ensure the turbocharger will continue to operate to Holset Service

standard on completion of overhaul.

Manual sections 1 to 5 where applicable, appear as a self extracting compressed file which is organised

according to the steps needed to most easily and correctly maintain the operation of the turbocharger. Users

are required to download this file to hard disk. Section 6 has its own file identity and resides at

www.holset.co.uk. so that Holset can update the Service Data as changes occur. The links between manual

and service data are active only when the user is connected to the Internet.

Chapter 6 has an expiry date to encourage users to discard outdated saved or printed versions and always

access the latest information available at www.holset.co.uk.

When using the manual on-line this icon will link to Holset’s website to help find your nearest agent

for advice and how to order Holset original parts.

How to Order Holset Original Parts

To make sure of optimum performance, certain items must be discarded during disassembly and replaced with

* new for re-assembly. These items are indicated in the Service and Overhaul section with the use of a

symbol.

* All items showing a are available in a basic overhaul kit.

To get the correct parts for your turbocharger, refer to the ‘component identification’ section of this manual to

help you find the following information:

1) Refer to the exploded view and component list to define the major components to be replaced.

2) Refer to the turbocharger’s dataplate which will be found on the compressor cover or wastegate

actuator to define the identifying information about your turbocharger build standard.

3) Contact your local Holset agent with componant identification nos. and dataplate assembly no., serial

no. and turbocharger type.

4) With this information, your local agent can provide you with the optimum kit of parts for re-assembling

your turbocharger for continued long life operation.

1:1

Share Link: