ELECTRICAL CHARACTERISTICS
STATIC ELECTRICAL CHARACTERISTICS
Table 4. Static Electrical Characteristics (continued)
Characteristics noted under conditions of -40 °C ≤ TA ≤ 125 °C, unless otherwise stated. Voltages are relative to GND, unless
otherwise noted. All positive currents are into the pin. All negative currents are out of the pin.
Characteristic
Symbol
Min
Typ
Max
Unit
LOAD
LOAD Voltage Rise (6)
Normal Speed and Voltage Mode, Transmit High-
Voltage Mode, Transmit High Speed Mode
VLDRISE
IIN = 1.0 mA, 5.0 V ≤ VBATT ≤ 26.5 V
–
Sleep Mode
IIN = 7.0 mA
33897T
–
IIN = 7.0 mA (7)
33897CT
–
Loss of Battery
IIN = 7.0 mA
–
LOAD Leakage During Loss of Module Ground (8)
ILDLEAK
0.0 V ≤ VBATT ≤ 18 V
33897T
0.0
0.0 V ≤ VBATT ≤ 18 V
33897CT
-10
V
–
0.1
–
1.0
–
0.1
–
1.0
μA
–
- 90
–
10
BUS
Passive Out BUS Leakage
Passive In
0.0 V ≤ VBATT ≤ 26.5 V, -1.5 V ≤ VBUS < 0 V
ILEAK
-5.0
–
Active In
0.0 V ≤ VBATT ≤ 26.5 V, 0 V < VBUS ≤ 12.5 V
ILKAI
-5.0
–
BUS Leakage During Loss of Module Ground (9)
0.0 V ≤ VBATT ≤ 18 V
0.0 V ≤ VBATT ≤ 18 V
33897T
IBLKLOG
-10
–
33897CT
0.0
–
High Voltage Wake-up Mode Output High Voltage
12 V ≤ VBATT ≤ 26.5 V, 200 Ω ≤ RL ≤ 3332 Ω
33897T VHVWUOHF
9.7
–
33897CT VHVWUOHO
9.9
–
5.0 V ≤ VBATT < 12 V, 200 Ω ≤ RL ≤ 3332 Ω
Lesser of VBAT - 1.5 or 9.7
High Speed Mode Output High Voltage
8.0 V ≤ VBATT ≤ 16 V, 75 Ω ≤ RL ≤ 135 Ω
VOHHS
4.2
–
Normal Mode Output High Voltage
6.0 V ≤ VBATT ≤ 26.5 V, 200 Ω ≤ RL ≤ 3332 Ω
5.0 V ≤ VBATT < 6.0 V, 200 Ω ≤ RL ≤ 3332 Ω
VNOHF
4.4
–
VNOHO
Lesser of VBATT - 1.6 or
–
4.4
BUS Low Voltage
VOL
5.0 V ≤ VBATT ≤ 26.5 V, 200 Ω ≤ RL ≤ 3332 Ω
- 0.2
–
Short-circuit BUS Output Current
Dominant State, 5.0 V ≤ VBATT ≤ 26.5 V
IBSC
-350
–
μA
5.0
5.0
10
-90
V
12.5
12.5
VBATT
V
5.1
V
5.1
Lesser of VBATT
or 5.1
V
0.2
mA
- 100
Notes
6. GMW3089V2.4 specifies the maximum load voltage rise to be 0.1 V whenever module battery is intact, including when in Sleep mode.
The maximum load voltage rise of 1.0 V in Sleep mode is a GM-approved exception to GMW3089V2.4.
7. 33897CT removes the diode drop during Sleep mode.
8. LOAD pin is at system ground voltage.
9. BUS pin is at system ground voltage
Analog Integrated Circuit Device Data
Freescale Semiconductor
33897
7