HLMP0815 データシートの表示（PDF） - Avago Technologies
部品番号
コンポーネント説明
メーカー
HLMP0815 Datasheet PDF : 6 Pages
| |||
Absolute Maximum Ratings at TA = 25°C
Parameter
Peak Forward Current
Average Forward Current[1,2] (Total)
DC Current[2] (Total)
Power Dissipation[3] (Total)
Operating Temperature Range
Storage Temperature Range
Reverse Voltage (IR = 100 µA)
Transient Forward Current[4]
(10 µsec Pulse)
HER/Green
Yellow/Green
Units
90
60
mA
25
20
mA
30
20
mA
135
135
mW
–20 to +100
–20 to +100
°C
–40 to +100
–40 to +100
°C
5
5
V
500
500
mA
Notes:
1. See Figure 5 to establish pulsed operating conditions.
2. The combined simultaneous current must not exceed the maximum.
3. The combined simultaneous current must not exceed the maximum.
4. The transient peak current is the maximum non-recurring current that can be applied to the device without damaging the LED die and wirebond.
It is not recommended that the device be operated at peak currents beyond the peak forward current listed in the Absolute Maximum Ratings.
Electrical/Optical Characteristics at TA = 25˚C
High Efficiency Red
Green
Symbol Parameter
Min. Typ. Max. Min. Typ. Max.
lPEAK Peak
635
568
Wavelength
ld
Dominant
626
570
Wavelength[1]
ts
Speed of
90
260
Response
C
Capacitance
11
18
VF
Forward
Voltage
1.9 2.6
2.2 3.0
VR
Reverse
5
5
Voltage
RqJ-PIN Thermal
210
210
Resistance
2q1/2
Included Angle between half luminous intensity points [2]
HLMP-40xx
65
65
HLMP-08xx
100
100
hV
Luminous
145
595
Efficacy[3]
Yellow
Min. Typ. Max. Units Test Condition
583
nm 20 mA
585
nm 20 mA
90
ns
15
2.1 2.6
pF VF = 0, f =1 MHz
V
20 mA
5
V
IR = 100 µA
210
°C/W Junction-to-
Cathode Lead
65
de-
gree
100
500
lm/W
Notes:
1. The dominant wavelength, ld, is derived from the CIE Chromaticity Diagram and represents the single wavelength which defines the color of the
device.
2. q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
3. Radiant intensity, le, in watts steradian, may be found from the equation le = Iv/hV, where Iv is the luminous intensity in candelas and h V is the
luminous efficacy in lumens/watt.
3
Share Link: 