ASDX データシートの表示（PDF） - Honeywell International
部品番号
コンポーネント説明
メーカー
ASDX Datasheet PDF : 4 Pages
| |||
Microstructure Pressure Sensors
0 psi to 1 psi through 0 psi to 100 psi
ASDX Series
PERFORMANCE SPECIFICATIONS(4)
Characteristic
Symbol
Min.
Typ.
Max.
Units
Zero Pressure Offset
Voff
0.420
0.500
0.580
Vdc
Full Scale Span(5)
Vfss
4.00
Vdc
Output at FS Pressure
Accuracy(6)
Response Time(7)
Quantization Step(8)
Vfso
–
4.420
–
–
–
4.500
–
8
3
4.580
±2.0
–
–
Vdc
% Vfs
ms
mV
SPECIFICATION NOTES
Note 1: Capacitor 220 nF required between +Vs and GND pin.
Note 2: Pins 4, 5, 6, 7 and 8 are internal device connections and should not be connected to external circuitry or ground.
Note 3: If maximum burst pressure is exceeded, even momentarily, the package may leak or burst, or the pressure sensing die may
fracture.
Note 4: Reference Conditions (unless otherwise noted): Supply voltage, VS=5.0 ± 0.01 Vdc; TA=25 °C [77 °F]. Output is ratiometric within
the supply voltage range (Vs).
Note 5: Span is the algebraic difference between the output voltage at the specified pressure and the output at zero pressure. Span is
ratiometric to the supply voltage.
Note 6: Accuracy is the combined errors from offset and span calibration, linearity, pressure hysteresis, and temperature effects.
Linearity is the measured deviation based on a straight line.
Hysteresis is the maximum output difference at any point within the operating pressure range for increasing and decreasing
pressure.
Calibration errors include the deviation of offset and full scale from nominal values.
Note 7: Response time for a 0 psi to full-scale pressure step change, 10 % to 90 % rise time.
Note 8: The smallest change in the output voltage, given any change in pressure.
PRESSURE TRANSDUCER PERFORMANCE CHARACTERISTICS
Error Band Multiplier Over -20 °C to 105 °C [-4 °F to 221 °F]
ORDERING INFORMATION - PART NUMBER DESCRIPTION
For example:
Part #ASDX015A24R=ASDX
device 15 psi absolute,
A2 Package, 0.5 Vdc to 4.5 Vdc
Output
Honeywell • Sensing and Control 3
Share Link: 