DM74ALS563A データシートの表示（PDF） - Fairchild Semiconductor

部品番号

コンポーネント説明

メーカー

DM74ALS563A

Octal D-Type Transparent Latch with 3-STATE Output

Fairchild Semiconductor 

October 1986

Revised February 2000

DM74ALS563A

Octal D-Type Transparent Latch with 3-STATE Output

General Description

These 8-bit registers feature totem-pole 3-STATE outputs

designed specifically for driving highly-capacitive or rela-

tively low-impedance loads. The high-impedance state and

increased high-logic-level drive provide these registers with

the capability of being connected directly to and driving the

bus lines in a bus-organized system without need for inter-

face or pull-up components. They are particularly attractive

for implementing buffer registers, I/O ports, bidirectional

bus drivers, and working registers.

The eight inverting latches of the DM74ALS563A are trans-

parent D-type latches. While the enable (G) is HIGH the Q

outputs will follow the data (D) inputs. When the enable is

taken LOW the output will be latched at the complement of

the level of the data that was set up.

A buffered output control input can be used to place the

eight outputs in either a normal logic state (HIGH or LOW

logic levels) or a high-impedance state. In the high-imped-

ance state the outputs neither load nor drive the bus lines

significantly.

The output control does not affect the internal operation of

the latches. That is, the old data can be retained or new

data can be entered even while the outputs are OFF.

Features

s Switching specifications at 50 pF

s Switching specifications guaranteed over full tempera-

ture and VCC range

s Advanced oxide-isolated, ion-implanted Schottky TTL

process

s 3-STATE buffer-type outputs drive bus lines directly

Ordering Code:

Order Number Package Number

Package Description

DM74ALS563AWM

M20B

20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300 Wide

DM74ALS563AN

N20A

20-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide

Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.

Connection Diagram

© 2000 Fairchild Semiconductor Corporation DS009162

www.fairchildsemi.com

Share Link: