MACH210-12 データシートの表示（PDF） - Advanced Micro Devices

部品番号

コンポーネント説明

メーカー

MACH210-12

High-Density EE CMOS Programmable Logic

Advanced Micro Devices 

AMD

ABSOLUTE MAXIMUM RATINGS

Storage Temperature . . . . . . . . . . . –65°C to +150°C

Ambient Temperature

with Power Applied . . . . . . . . . . . . . –55°C to +125°C

Supply Voltage with

Respect to Ground . . . . . . . . . . . . . –0.5 V to +7.0 V

DC Input Voltage . . . . . . . . . . . –0.5 V to VCC + 0.5 V

DC Output or

I/O Pin Voltage . . . . . . . . . . . . –0.5 V to VCC + 0.5 V

Static Discharge Voltage . . . . . . . . . . . . . . . . . 2001 V

Latchup Current

(TA = 0°C to +70°C) . . . . . . . . . . . . . . . . . . . . 200 mA

Stresses above those listed under Absolute Maximum Ratings

may cause permanent device failure. Functionality at or above

these limits is not implied. Exposure to Absolute Maximum

Ratings for extended periods may affect device reliability. Pro-

gramming conditions may differ.

OPERATING RANGES

Commercial (C) Devices

Temperature (TA) Operating

in Free Air . . . . . . . . . . . . . . . . . . . . . . . 0°C to +70°C

Supply Voltage (VCC) with

Respect to Ground . . . . . . . . . . . . +4.75 V to +5.25 V

Operating ranges define those limits between which the func-

tionality of the device is guaranteed.

DC CHARACTERISTICS over COMMERCIAL operating ranges unless otherwise specified

Parameter

Symbol

Parameter Description

Test Conditions

Min Typ Max Unit

VOH

Output HIGH Voltage

VOL

Output LOW Voltage

VIH

Input HIGH Voltage

IOH = –3.2 mA, VCC = Min

VIN = VIH or VIL

IOL = 16 mA, VCC = Min

VIN = VIH or VIL

Guaranteed Input Logical HIGH

Voltage for all Inputs (Note 1)

2.4

V

0.5 V

2.0

V

VIL

Input LOW Voltage

Guaranteed Input Logical LOW

Voltage for all Inputs (Note 1)

0.8

V

IIH

Input HIGH Leakage Current

VIN = 5.25 V, VCC = Max (Note 2)

10 µA

IIL

Input LOW Leakage Current

VIN = 0 V, VCC = Max (Note 2)

–100 µA

IOZH

Off-State Output Leakage

Current HIGH

VOUT = 5.25 V, VCC = Max

VIN = VIH or VIL (Note 2)

10 µA

IOZL

Off-State Output Leakage

Current LOW

VOUT = 0 V, VCC = Max

VIN = VIH or VIL (Note 2)

–100 µA

ISC

Output Short-Circuit Current

VOUT = 0.5 V, VCC = Max (Note 3)

–30

–160 mA

ICC

Supply Current

VIN = 0 V, Outputs Open (IOUT = 0 mA)

VCC = 5.0 V, f = 25 MHz, TA = 25°C

(Note 4)

130

mA

Notes:

1. These are absolute values with respect to device ground and all overshoots due to system or tester noise are included.

2. I/O pin leakage is the worst case of IIL and IOZL (or IIH and IOZH).

3. Not more than one output should be shorted at a time and duration of the short-circuit should not exceed one second.

VOUT = 0.5 V has been chosen to avoid test problems caused by tester ground degradation.

4. This parameter is measured with a 16-bit up/down counter pattern. This pattern is programmed in each PAL block and

capable of being loaded, enabled, and reset.

10

MACH210A-7 (Com’l)

Share Link: