MAX3509 データシートの表示（PDF） - Maxim Integrated
部品番号
コンポーネント説明
メーカー
MAX3509 Datasheet PDF : 10 Pages
| |||
Upstream CATV Amplifier
ABSOLUTE MAXIMUM RATINGS
VCC1, VCC2 to GND, GND1 .................................-0.3V to +10.0V
SCLK, SDA, CS, TXEN, SHDN to GND
and GND1 .........................................................-0.3V to +5.5V
Continuous Input Voltage (IN+, IN-)....................................2VP-P
Continuous Current (OUT+, OUT-) .....................................80mA
Continuous Power Dissipation (TA = +70°C)
20-Pin TSSOP-EP (derate at 27mW/°C above
+70°C)........................................................................2200mW
Operating Temperature Range ...........................-40°C to +85°C
Junction Temperature ......................................................+150°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
DC ELECTRICAL CHARACTERISTICS
(VCC1 = VCC2 = 8.5V to 9.5V, TXEN = SHDN = high, D7 = 1, TA = -40°C to +85°C, unless otherwise noted. No input signal applied.
Typical parameters are at TA = +25°C.) (Note 2.)
PARAMETER
SYMBOL
Supply Voltage
VCC
Supply Current Transmit Mode
ICC
Supply Current Transmit-Disable
Mode
ICC
Supply Current Shutdown Mode
ICC
Input High Voltage
VINH
Input Low Voltage
VINL
Input High Current
IBIASH
Input Low Current
IBIASL
CONDITIONS
TXEN = low or D7 = 0
SHDN = low, TXEN = low
MIN
8.5
2.0
-100
TYP
84
7.8
10
MAX
9.5
115
UNITS
V
mA
10
mA
µA
V
0.8
V
100
µA
µA
AC ELECTRICAL CHARACTERISTICS
(MAX3509 EV kit, VCC1 = VCC2 = 8.5V to 9.5V, TXEN = SHDN = high, D7 = 1, VINPUT = 34dBmV differential, output impedance =
75Ω through a 1:1 transformer, TA = -40°C to +85°C, unless otherwise noted. Typical parameters are at TA = +25°C.) (Note 2.)
PARAMETER
SYMBOL
CONDITIONS
MIN TYP MAX UNITS
TA = +25°C, fINPUT = 42MHz, gain-control
word = 63
33
TA = +25°C, fINPUT = 42MHz, gain-control
word = 0
-22
Voltage Gain
AV
TA = +25°C, fINPUT = 42MHz, gain-control
word = 50
dB
22.8 24.2 26.7
Gain Fariness (note 1)
Gain Step Size
fINPUT = 42MHz, gain-control word = 63
31
fINPUT = 42MHz, gain-control word = 0
-21
fINPUT = 42MHz, gain-control word = 50
21.3 24.2 26.7
VOUTPUT = 60dBmV, fINPUT = 5MHz to 42MHz
VOUTPUT = 60dBmV, fINPUT = 5MHz to 65MHz
0.1
0.4
dB
dB
0.3
0.9
fINPUT = 5MHz to 65MHz, AV = -20dB to
+33dB
0.7
1
1.3
dB
2 _______________________________________________________________________________________
Share Link: 