MAX4501CSA データシートの表示（PDF） - Maxim Integrated
部品番号
コンポーネント説明
メーカー
MAX4501CSA Datasheet PDF : 8 Pages
| |||
Low-Voltage, SPST, CMOS Analog Switches
ELECTRICAL CHARACTERISTICS—+3V Supply
(V+ = +3.0V to +3.6V, VINH = 2.4V, VINL = 0.8V, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.) (Note 2)
PARAMETER
SYMBOL
CONDITIONS
MIN TYP MAX UNITS
ANALOG SWITCH
Analog Signal Range
VCOM,
VNO, VNC
0
V+
V
COM to NO or NC
On-Resistance
RON
VCOM = 1.5V,
ICOM = 0.1mA
TA = +25°C
TA = TMIN to TMAX
175
600
Ω
800
DIGITAL I/O
Input Logic High
VINH
2.4
V+
V
Input Logic Low
VINL
0
0.8
V
Input Current Logic High or Low IINH, IINL VIN = 0 or V+
-1.00 0.03 1.00
µA
SWITCH DYNAMIC CHARACTERISTICS
Turn-On Time
(Note 5)
VNO = VNC = 1.5V,
TA = +25°C
tON
VIN = 3V, RL = 1kΩ,
Figure 1
TA = TMIN to TMAX
45
300
ns
500
Turn-Off Time
(Note 5)
Charge Injection (Note 5)
POWER SUPPLY
V+ Supply Current
VNO = VNC = 1.5V,
TA = +25°C
tOFF VIN = 3V, RL = 1kΩ,
Figure 1
TA = TMIN to TMAX
Q
CL = 1nF, TA = +25°C, Figure 2
I+
IN = 0 or V+
TA = +25°C
TA = TMIN to TMAX
10
125
ns
175
0.5
10
pC
-1
1
µA
-10
10
Note 2: Algebraic convention is used in this data sheet; the most negative value is shown in the minimum column.
Note 3: Leakage parameters are 100% tested at maximum-rated hot operating temperature, and are guaranteed by correlation
at +25°C.
Note 4: SOT and SC70 packaged parts are 100% tested at +25°C. Limits at maximum and minimum rated temperature are guaran-
teed by design and correlation limits at +25°C.
Note 5: Guaranteed, not production tested.
4 _______________________________________________________________________________________
Share Link: 