MAX7033(2004) データシートの表示（PDF） - Maxim Integrated
部品番号
コンポーネント説明
メーカー
MAX7033 Datasheet PDF : 16 Pages
| |||
315MHz/433MHz ASK Superheterodyne
Receiver with AGC Lock
ABSOLUTE MAXIMUM RATINGS
VDD5 to AGND.......................................................-0.3V to +6.0V
AVDD to AGND ......................................................-0.3V to +4.0V
DVDD to DGND......................................................-0.3V to +4.0V
AGND to DGND.....................................................-0.1V to +0.1V
IRSEL, DATAOUT, XTALSEL,
AC, SHDN to AGND .............................-0.3V to (VDD5 + 0.3V)
All Other Pins to AGND............................-0.3V to (DVDD + 0.3V)
Continuous Power Dissipation (TA = +70°C)
28-Pin TSSOP (derate 12.8mW/°C above +70°C) ..1025.6mW
32-Thin QFN (derate 21.3mW/°C above +70°C) ....1702.1mW
Operating Temperature Range .........................-40°C to +105°C
Junction Temperature ......................................................+150°C
Storage Temperature Range .............................-60°C to +150°C
Lead Temperature (soldering 10s) ..................................+300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
DC ELECTRICAL CHARACTERISTICS (+3.3V OPERATION)
(Typical Application Circuit, AVDD = DVDD = VDD5 = +3.0V to +3.6V, no RF signal applied, TA = -40°C to +105°C, unless otherwise
noted. Typical values are at AVDD = DVDD = VDD5 = +3.3V and TA = +25°C.) (Note 1)
PARAMETER
Supply Voltage
Supply Current
Shutdown Supply Current
Input-Voltage Low
Input-Voltage High
SYMBOL
AVDD,
DVDD
IDD
ISHDN
VIL
CONDITIONS
+3.3V nominal supply voltage
V SHDN = DVDD
V SHDN = 0V,
VXTALSEL = 0V
fRF = 315MHz
fRF = 433MHz
fRF = 315MHz
fRF = 433MHz
VIH
MIN TYP
3.0
3.3
5.2
5.7
2.6
3.5
DVDD -
0.4
MAX
3.6
6.23
6.88
8.0
0.4
UNITS
V
mA
µA
V
V
Input Logic Current High
Image-Reject Select Voltage
(Note 2)
IIH
fRF = 433MHz, VIRSEL = VDD5
fRF = 375MHz, VIRSEL = VDD5 / 2
10
µA
VDD5 -
0.4
1.1
VDD5 -
V
1.0
DATAOUT Output-Voltage Low
DATAOUT Output-Voltage High
VOL
VOH
fRF = 315MHz, VIRSEL = 0V
ISINK = 10µA
ISOURCE = 10µA
0.4
0.125
V
DVDD -
0.125
V
DC ELECTRICAL CHARACTERISTICS (+5.0V OPERATION)
(Typical Application Circuit, VDD5 = +4.5V to +5.5V, no RF signal applied, TA = -40°C to +105°C, unless otherwise noted. Typical val-
ues are at VDD5 = +5.0V and TA = +25°C.) (Note 1)
PARAMETER
Supply Voltage
Supply Current
Shutdown Supply Current
Input-Voltage Low
SYMBOL
VDD5
IDD
ISHDN
VIL
CONDITIONS
+5.0V nominal supply voltage
V SHDN = VDD5
fRF = 315MHz
fRF = 433MHz
V SHDN = 0V,
VXTALSEL = 0V
fRF = 315MHz
fRF = 433MHz
MIN TYP MAX UNITS
4.5
5.0
5.5
V
5.2
6.4
mA
5.7 6.76
3.7
µA
4.2
9.0
0.4
V
2 _______________________________________________________________________________________
Share Link: 