MB89910 データシートの表示（PDF） - Fujitsu

部品番号

コンポーネント説明

メーカー

MB89910

8-bit Proprietary Microcontroller

Fujitsu 

MB89910 Series

(Continued)

Partnumber

Parameter

MB89913

MB89915

MB89P915

MB89PPV910

External interrupt

2 independent channels (edge selection, interrupt vector, factor flag)

Rising/ falling/both edges selectable

Built-in analog noise canceller

Used also for wake-up stop/sleep modes.

(Edge detection is also permitted in stop mode.)

Low-voltage detection

reset

Continuous operation

(detection power supply voltage of 4.0±0.3 V, 3.6±0.3 V or

3.3±0.3 V)

Intermittent operation

(Activated for each watch interrupt under the dual-clock sys-

tem)

Not available

Low-power consumption

(Standby mode)

Sleep mode, stop mode, and watch mode

Process

CMOS

Operating voltage*

3.8 V to 5.5 V

4.5 V to 5.5 V

EPROM for use



MBM27C256A-

20CZ

* : Varies with conditions such as the operating frequency. (See section “s Electrical Characteristics.”)

In the case of the MB89PV910, the voltage varies with the ICE or the EPROM to be connected.

s PACKAGE AND CORRESPONDING PRODUCTS

Package

DIP-48P-M01

MB89913

MB89915

MB89P915

MB89PV910

×

FPT-48P-M15

*1

×

MDP-64C-P02

×

*2

: Available ×: Not available

*1: Under examination for development

*2: Available by conversion from MDIP-64 to SH-DIP-48

64SD-48SD-8L2: For conversion (MDP-64C-P02) → DIP-48P-M01

Inquiry: Sun Hayato Co., Ltd.: TEL: (81)-3-3986-0403

FAX: (81)-3-5396-9106

Note: For more information about each package, see section “s Package Dimensions.”

4

Share Link: