MC-4532CD646
DC Characteristics (Recommended Operating Conditions Unless Otherwise Noted)
Parameter
Symbol
Test condition
Grade MIN. MAX. Unit Notes
•
Operating current
ICC1 Burst length = 1
tRC ≥ tRC(MIN.), IO = 0 mA
/CAS latency = 2 -A80
-A10
1,040 mA 1
1,040
•
/CAS latency = 3 -A80
•
-A10
Precharge standby current in ICC2P CKE ≤ VIL(MAX.), tCK = 15 ns
•
power down mode
ICC2PS CKE ≤ VIL(MAX.), tCK = ∞
Precharge standby current in ICC2N CKE ≥ VIH(MIN.), tCK = 15 ns, /CS ≥ VIH(MIN.),
non power down mode
Input signals are changed one time during 30 ns.
1,040
1,040
16 mA
16
320 mA
ICC2NS CKE ≥ VIH(MIN.), tCK = ∞
96
Input signals are stable.
Active standby current in
power down mode
Active standby current in
non power down mode
ICC3P CKE ≤ VIL(MAX.), tCK = 15 ns
ICC3PS CKE ≤ VIL(MAX.), tCK = ∞
ICC3N CKE ≥ VIH(MIN.), tCK = 15 ns, /CS ≥ VIH(MIN.),
Input signals are changed one time during 30 ns.
80 mA
64
400 mA
ICC3NS CKE ≥ VIH(MIN.), tCK = ∞, Input signals are stable.
320
•
Operating current
•
(Burst mode)
•
•
ICC4
tCK ≥ tCK(MIN.)
IO = 0 mA
•
CBR (Auto) refresh current
ICC5 tRC ≥ tRC(MIN.)
•
•
•
/CAS latency = 2 -A80
-A10
/CAS latency = 3 -A80
-A10
/CAS latency = 2 -A80
-A10
/CAS latency = 3 -A80
-A10
1,200 mA 2
1,000
1,400
1,240
2,080 mA 3
2,080
2,080
2,080
Self refresh current
Input leakage current
ICC6 CKE ≤ 0.2 V
II(L) VI = 0 to 3.6 V, All other pins not under test = 0 V
32 mA
– 16 + 16 µA
Input leakage current (CKE1)
– 500 +500
Output leakage current
IO(L) DOUT is disabled, VO = 0 to 3.6 V
– 3 + 3 µA
High level output voltage
VOH IO = – 4.0 mA
2.4
V
Low level output voltage
VOL IO = + 4.0 mA
0.4 V
Notes 1. ICC1 depends on output loading and cycle rates. Specified values are obtained with the output open. In
addition to this, ICC1 is measured on condition that addresses are changed only one time during tCK (MIN.).
2. ICC4 depends on output loading and cycle rates. Specified values are obtained with the output open. In
addition to this, ICC4 is measured on condition that addresses are changed only one time during tCK (MIN.).
3. ICC5 is measured on condition that addresses are changed only one time during tCK (MIN.).
6
Data Sheet M13681EJ4V0DS00