MC33591FTA データシートの表示（PDF） - Motorola => Freescale

部品番号

コンポーネント説明

メーカー

MC33591FTA

PLL Tuned UHF Receiver for Data Transfer Applications

Motorola => Freescale 

COMMUNICATION PROTOCOL

COMMUNICATION PROTOCOL

MANCHESTER CODING DESCRIPTION

Manchester coding is defined as follows: data is sent during the first half-bit, complementary data is sent

during the second half-bit.

Figure 3: Manchester coding example

0 100110

Original data

Manchester coded

The signal average value is constant. This allows clock recovery from the data stream itself. In order to

achieve a correct clock recovery, Manchester coded data must have a duty cycle between:

- 48% and 52% in OOK,

- 45% and 55% in FSK.

PREAMBLE, ID, HEADER WORDS AND MESSAGE DESCRIPTION

The following description applies if the Data Manager is enabled (DME=1).

The ID word is a Manchester coded byte whose content has been previously loaded in the Configuration

Register 2. The complement of the ID word is recognized as an ID word. ID word is sent at the same data rate as

data.

A preamble is required:

- before ID,

- before Header if HE=1,

- before data if HE=0.

It enables:

- in case of OOK modulation, AGC to settle,

- in case of FSK modulation, data slicer reference voltage to settle,

- in any case, clock recovery.

Figure 4 defines the Preamble word in OOK and FSK modulation. Preamble content must be carefully defined in

order not to be decoded as an ID or Header word.

Figure 4: Preamble definition

OOK Modulation:

AGC settling time Clock recovery

ID

‘1’ NRZ > 200µs

i.e.:

2 ‘1’ NRZ at 9.6kBd,

1 ‘1’ NRZ at 4.8kBd

‘0’ Manchester

at data rate

FSK Modulation:

Data slicer reference settling time Clock recovery

ID

3 ‘1’ or ‘0’ Manchester

at data rate

‘1’ or ‘0’ Manchester

at data rate

MOTOROLA

MC33591 Technical Data

5

Share Link: