SP8902MP1S データシートの表示（PDF） - Mitel Networks
部品番号
コンポーネント説明
メーカー
SP8902MP1S Datasheet PDF : 6 Pages
| |||
The SP8902 is one of a range of very high speed low
power prescalers for professional applications. The dividing
elements are static D type flip flops and therefore allow
operation down to DC if the drive signal is a pulse waveform
with fast risetime. The output stage has a differential current
output and provides a direct drive into a 50 ohm load.
SP8902 (MP)
5GHZ 42 Fixed Modulus Divider
Preliminary Information
DS4375 Issue 1.4 September 1999
Ordering Information
SP8902/KG/MP1S (tubes)
SP8902/KG/MP1T (tape and reel)
Features
G Very High Operating Speed
G Operation down to DC with Square Wave Input
G Silicon Technology for Low Phase Noise
(Typically better than 2140dBc/Hz at 1KHz)
G 5V Single Supply Operation
G Low Power Dissipation: 335mW (Typ.)
G Surface Mount Plastic Package
Absolute Maximum Ratings
Supply voltage, VCC
6·5V
Storage temperature
265°C to 1150°C
Maximum junction temperature
1150°C
Prescaler input voltage
2·5Vp-p
Operating temperature
KG240°C to 185°C TCASE
OUTPUT
VCC VCC
1
8
7 OUTPUT
6 OUTPUT
VREF
400 400
INPUT 2
INPUT 3
42
10mA
44
GND
Figure 1 block diagram
Share Link: 