UPC4061G2 データシートの表示（PDF） - NEC => Renesas Technology
部品番号
コンポーネント説明
メーカー
UPC4061G2 Datasheet PDF : 12 Pages
| |||
µPC4061
ABSOLUTE MAXIMUM RATINGS (TA = 25 °C)
Parameter
Symbol
Ratings
Unit
Voltage between V+ and V– Note 1
V+ – V–
–0.3 to +36
V
Differential Input Voltage
VID
Input VoltageNote 2
VI
Output VoltageNote 3
VO
Power Dissipation
C PackageNote 4
PT
G2 PackageNote 5
Output Short Circuit DurationNote 6
±30
V
V––0.3 to V+ +0.3
V
V––0.3 to V+ +0.3
V
350
mW
440
mW
Indefinite
sec
Operating Ambient Temperature
TA
–20 to +80
°C
Storage Temperature
Tstg
–55 to +125
°C
Notes 1. Reverse connection of supply voltage can cause destruction.
2. The input voltage should be allowed to input without damage or destruction. Even during the transition
period of supply voltage, power on/off etc., this specification should be kept. The normal operation will
establish when the both inputs are within the Common Mode Input Voltage Range of electrical
characteristics.
3. This specification is the voltage which should be allowed to supply to the output terminal from external
without damage or destructive. Even during the transition period of supply voltage, power on/off etc., this
specification should be kept. The output voltage of normal operation will be the Output Voltage Swing of
electrical characteristics.
4. Thermal derating factor is –5.0 mV/°C when operating ambient temperature is higher than 55 °C.
5. Thermal derating factor is –4.4 mV/°C when operating ambient temperature is higher than 25 °C.
6. Pay careful attention to the total power dissipation not to exceed the absolute maximum ratings, Note 4
and Note 5.
RECOMMENDED OPERATING CONDITIONS
Parameter
Supply Voltage
Output Source Current
Output Sink Current
Capacitive Load (AV = +1, Rf = 0 Ω)
Symbol
MIN.
TYP.
MAX.
Unit
V±
±2
±16
V
IO SOURCE
5
mA
IO SINK
3.5
mA
CL
100
pF
OFFSET VOLTAGE NULL CIRCUIT
2_
6
+
5
3
1
100 kΩ
VR1
_
V
5 Remark The OFFSET NULL pins should be left
open or connected to V– via a resistor as
shown in the left figure. Don't connect to
any lines other than V–, otherwise
mulfunction, degradation, or failure may
occur.
2
Data Sheet G15038EJ3V0DS00
Share Link: 