ZSH330N8 データシートの表示（PDF） - Zetex => Diodes

部品番号

コンポーネント説明

メーカー

ZSH330N8

SUPPLY VOLTAGE MONITOR

Zetex => Diodes 

SUPPLY VOLTAGE

MONITOR

ISSUE 1 - DECEMBER 1997

DEVICE DESCRIPTION

The ZSH330 is a three terminal under voltage

monitor circuit for use in microprocessor

systems. The threshold voltage of the device

has been set to 3.1 volts making it ideal for

3.3 volt circuits.

Included in the device is a precise voltage

reference and a comparator with built in

hysteresis to prevent erratic operation. The

ZSH330 features an open collector output

capable of sourcing at least l0mA which only

requires a single external resistor to

interface to following circuits.

Operation of the device is guaranteed from

one volt upwards, from this level to the

device threshold voltage the output is held

high providing a power on reset function.

Should the supply voltage, once established,

at any time drop below the threshold level

then the output again will pull high.

The device is available in a TO92 package for

through hole applications as well as SO8 and

SOT223 for surface mount requirements.

SCHEMATIC DIAGRAM

ZSH330

FEATURES

• SO8, SOT223 and TO92 packages

• Power on reset generator

• Automatic reset generation

• Low standby current

• Guaranteed operation from 1 volt

• Wide supply voltage range

• Internal clamp diode to discharge

delay capacitor

• 3.1 volt threshold for 3.3 volt logic

• 20mV hysteresis prevents erratic operation

APPLICATIONS

• Microprocessor systems

• Computers

• Computer peripherals

• Instrumentation

• Automotive

• Battery powered equipment

Vcc

Out

Gnd

4-329

Share Link: