DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

MC-4516DA727PFA データシートの表示(PDF) - Elpida Memory, Inc

部品番号
コンポーネント説明
メーカー
MC-4516DA727PFA Datasheet PDF : 15 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
MC-4516DA727
DC Characteristics (Recommended Operating Conditions unless otherwise noted)
Parameter
Symbol
Test condition
Grade MIN. MAX. Unit Notes
Operating current
ICC1 Burst length = 1
/CAS latency = 2 -A75
1,300 mA 1
tRC tRC (MIN.), IO = 0 mA
/CAS latency = 3 -A75
1,345
Precharge standby current in ICC2P CKE VIL (MAX.), tCK = 15 ns
259 mA
power down mode
ICC2PS CKE VIL (MAX.), tCK =
89
Precharge standby current in
non power down mode
ICC2N
CKE VIH (MIN.), tCK = 15 ns, /CS VIH (MIN.),
Input signals are changed one time during 30 ns.
430 mA
ICC2NS CKE VIH (MIN.), tCK = , Input signals are stable.
152
Active standby current in
ICC3P CKE VIL (MAX.), tCK = 15 ns
295 mA
power down mode
ICC3PS CKE VIL (MAX.), tCK =
116
Active standby current in
non power down mode
ICC3N CKE VIH (MIN.), tCK = 15 ns, /CS VIH (MIN.),
Input signals are changed one time during 30 ns.
520 mA
ICC3NS CKE VIH (MIN.), tCK = , Input signals are stable.
260
Operating current
ICC4 tCK tCK (MIN.), IO = 0 mA
/CAS latency = 2 -A75
1,480 mA 2
(Burst mode)
/CAS latency = 3 -A75
1,795
CBR (Auto) Refresh current
ICC5
tRC tRC (MIN.)
/CAS latency = 2 -A75
2,470 mA 3
/CAS latency = 3 -A75
2,560
Self refresh current
ICC6 CKE 0.2 V
268 mA
Input leakage current
II (L) VI = 0 to 3.6 V, All other pins not under test = 0 V
–10 +10 µA
Output leakage current
IO (L) DOUT is disabled, VO = 0 to 3.6 V
–1.5 +1.5 µA
High level output voltage
VOH IO = –4.0 mA
2.4
V
Low level output voltage
VOL IO = +4.0 mA
0.4 V
Notes 1. ICC1 depends on output loading and cycle rates. Specified values are obtained with the output open. In
addition to this, ICC1 is measured on condition that addresses are changed only one time during tCK (MIN.).
2. ICC4 depends on output loading and cycle rates. Specified values are obtained with the output open. In
addition to this, ICC4 is measured on condition that addresses are changed only one time during tCK (MIN.).
3. ICC5 is measured on condition that addresses are changed only one time during tCK (MIN.).
6
Data Sheet E0075N20

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]