BConnector Operation and Precautions
1. FPC Termination procedure
1 Lift up the actuator. Use thumb or index finger.
Operation
2 Insert with the FPC parallel to the mounting surface, with the exposed conductive traces facing down.
FPC
conductor surface
Step 1
Step 2
3 Rotate down the actuator until firmly closed.
NOTE: The FPC must be fully inserted in the connector. If not fully
inserted, the actuator will not close properly. Should this be the
case, lift up the actuator (per Step 2 below) and repeat the process
(starting with Step 1 above)
Step 3
3 For connectors with multiple contacts, such as 39 and 61 pos.
rotate down the actuator pushing at both ends.
2. FPC Extraction Method
1 Lift up the actuator. Carefully remove the FPC.
64