M28W320ECT70N1F データシートの表示（PDF） - STMicroelectronics

部品番号

コンポーネント説明

メーカー

M28W320ECT70N1F

32 Mbit (2Mb x16, Boot Block) 3V Supply Flash Memory

STMicroelectronics 

M28W320ECT, M28W320ECB

APPENDIX C. FLOWCHARTS AND PSEUDO CODES

Figure 17. Program Flowchart and Pseudo Code

Start

Write 40h or 10h

Write Address

& Data

Read Status

Register

program_command (addressToProgram, dataToProgram) {:

writeToFlash (any_address, 0x40) ;

/*or writeToFlash (any_address, 0x10) ; */

writeToFlash (addressToProgram, dataToProgram) ;

/*Memory enters read status state after

the Program Command*/

do {

status_register=readFlash (any_address) ;

/* E or G must be toggled*/

NO

b7 = 1

YES

NO

b3 = 0

YES

NO

b4 = 0

YES

NO

b1 = 0

YES

End

VPP Invalid

Error (1, 2)

Program

Error (1, 2)

Program to Protected

Block Error (1, 2)

} while (status_register.b7== 0) ;

if (status_register.b3==1) /*VPP invalid error */

error_handler ( ) ;

if (status_register.b4==1) /*program error */

error_handler ( ) ;

if (status_register.b1==1) /*program to protect block error */

error_handler ( ) ;

}

AI03538b

Note: 1. Status check of b1 (Protected Block), b3 (VPP Invalid) and b4 (Program Error) can be made after each program operation or after

a sequence.

2. If an error is found, the Status Register must be cleared before further Program/Erase Controller operations.

42/53

Share Link: