+3.3V, 1Mbps, Low-Supply-Current
CAN Transceiver
TIMING CHARACTERISTICS
(VCC = +3.3V ±5%, RL = 60Ω, CL = 100pF, TA = TMIN to TMAX, unless otherwise noted. Typical values are at VCC = +3.3V and TA =
+25°C.)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
Delay TXD to Bus Active
(Figure 1)
Delay TXD to Bus Inactive
(Figure 1)
Delay Bus to Receiver Active
(Figure 1)
Delay Bus to Receiver Inactive
(Figure 1)
Differential-Output Slew Rate
tONTXD
tOFFTXD
tONRXD
tOFFRXD
SR
VRS = 0V (≤1Mbps)
RRS = 25kΩ (≤500kbps)
RRS = 100kΩ (≤125kbps)
VRS = 0V (≤1Mbps)
RRS = 25kΩ (≤500kbps)
RRS = 100kΩ (≤125kbps)
VRS = 0V (≤1Mbps)
RRS = 25kΩ (≤500kbps)
RRS = 100kΩ (≤125kbps)
VRS = 0V (≤1Mbps)
RRS = 25kΩ (≤500kbps)
RRS = 100kΩ (≤125kbps)
VRS = 0V (≤1Mbps)
RRS = 25kΩ (≤500kbps)
RRS = 100kΩ (≤125kbps)
50
183
ns
770
70
226
ns
834
80
200
ns
730
100
245
ns
800
96
12.5
V/µs
2.9
Bus Dominant to RXD Active
Standby to Receiver Active
tDRXDL
tSBRXDL
RRS = 200kΩ (≤62.5kbps)
VRS > 0.8 x VCC, standby, Figure 2
BUS dominant, Figure 2
1.6
1
µs
4
µs
SHDN to Bus Inactive
SHDN to Receiver Active
tOFFSHDN TXD = GND, Figure 3 (Note 2)
tONSHDN BUS dominant, Figure 3 (Note 3)
1
µs
4
µs
SHDN to Standby
tSHDNSB Figure 4
20
µs
Note 1: All currents into device are positive; all currents out of the device are negative. All voltages are referenced to device
ground, unless otherwise noted.
Note 2: No other devices on the BUS.
Note 3: BUS externally driven.
4 _______________________________________________________________________________________