MF1SPLUS6001DA4/03 データシートの表示（PDF） - NXP Semiconductors.

部品番号

コンポーネント説明

メーカー

MF1SPLUS6001DA4/03

Mainstream contactless smart card IC for fast and easy solution development

NXP Semiconductors. 

NXP Semiconductors

MF1SPLUSx0y1

Mainstream contactless smart card IC

9.2 Security level 0, 1, 3: ISO/IEC 14443-4

Table 5. ISO/IEC 14443-4

Command

RATS

PPS

DESELECT

Description

the response to the RATS command identifies the PICC type to the

PCD.

the PPS command allows an individual selection of the

communication baud rate between PCD and PICC. It is possible

for the MF1SPLUSx0y1 to individually set the communication baud

rate independently of each other for both directions i.e.

MF1SPLUSx0y1 allows a non-symmetrical information

interchange speed.

deselection according to ISO/IEC 14443-4

Please find more information on ISO/IEC 14443 in Ref. 5 as well as on the settings of

ATQA, SAK and ATS in Ref. 4.

9.3 Security level 0 command overview

Table 6. Security level 0 command overview

Command

Description

Write Perso

pre-personalization of AES keys and all blocks

Commit Perso

switch to security level 1

First Authenticate (part 1)

first authenticate

Following Authenticate (part 1) following authenticate

Authenticate (part 2)

second authentication step

9.4 Security level 1 command overview

Table 7. Security level 1 command overview

MF1ICS50, MF1ICS70,

MF1ICS20 commands

Description

MF Authenticate key A

authentication with key A

MF Authenticate key B

authentication with key B

MF Read

reading data

MF Write

writing data

MF Increment

incrementing a value

MF Decrement

decrementing a value

MF Restore

restoring a value

MF Transfer

transferring a value

Commands using backwards compatibility protocol, see Section 8.2.1

Following Authenticate (part 1) following authenticate; protocol used as described in

Section 8.2.1

Authenticate (part 2)

second authentication step; protocol used as described in

Section 8.2.1

MF1SPLUSX0Y1_SDS

Product short data sheet

PUBLIC

All information provided in this document is subject to legal disclaimers.

Rev. 3.2 — 21 February 2011

187032

© NXP B.V. 2011. All rights reserved.

10 of 17

Share Link: