2.2 Interface Pin Description
Pin No.
1
2
3
4
5
6
7~10
11~14
Symbol
VSS
VDD
VO
RS
R/W
E
DB0 ~ DB3
DB4~DB7
Signal Description
Power Supply (Vss=0)
Power Supply (VDD>VSS)
NC
Register Selection input
High = Data register
Low = Instruction register (for write)
Busy flag address counter (for read)
Read/Write signal input is used to select the read/write
mode
High = Read mode, Low = Write mode
Start enable signal to read or write the data
Four low order bi-directional three-state data bus lines. Use
for data transfer between the MPU and the LCD module.
These four are not used during 4-bit operation.
Four high order bi-directional three-state data bus lines.
Used for data transfer between the MPU and the LCD
module.
DB7 can be used as a busy flag.
15
A
16
K
Backlight controll
Power supply for LED B/L (+)
Power supply for LED B/L (-)
PC1602LRS-FWA-H-YW Ver.0(DK)
LCD MODULE
15
16
4.2V
Page10