S70GL01GN00 データシートの表示（PDF） - Spansion Inc.
部品番号
コンポーネント説明
メーカー
S70GL01GN00 Datasheet PDF : 83 Pages
| |||
S70GL01GN00 MirrorBitTM Flash
1024 Megabit, 3.0 Volt-only Page Mode
Flash Memory featuring
110 nm MirrorBit™ Process Technology
Data Sheet
The S70GL01GN has been retired and is not recommended for designs. For new and current designs, S29GL01GP supersedes S70GL01GN
and is the factory-recommended migration path for this device. Please refer to the S29GL01GP data sheet for specifications and ordering
information. Availability of this document is retained for reference and historical purposes only.
Distinctive Characteristics
Architectural Advantages
Two 512 Megabit (S29GL512N) in a single 64-ball
Fortified-BGA package
Two Chip Enable pins
— Two CE# pins to control selection of each internal
S29GL512N devices
Single power supply operation
— 3 volt read, erase, and program operations
Manufactured on 110 nm MirrorBit process
technology
Secured Silicon Sector region
— 128-word/256-byte sector for permanent, secure
identification through an 8-word/16-byte random
Electronic Serial Number, accessible through a
command sequence
Flexible sector architecture
— Each internal S29GL512N device has five hundred-
twelve 64Kword (128Kbyte) sector
Compatibility with JEDEC standards
— Provides pinout and software compatibility for single-
power supply flash, and superior inadvertent write
protection
100,000 erase cycles per sector typical
20-year data retention typical
Performance Characteristics
High performance
— 110 ns (S29GL512N)
— 8-word/16-byte page read buffer
— 25 ns page read times
— 16-word/32-byte write buffer reduces overall
programming time for multiple-word updates
Low power consumption (typical values at 3.0 V, 5
MHz)
— 25 mA typical active read current;
— 50 mA typical erase/program current
— 1 µA typical standby mode current
Package options
— 64-ball Fortified BGA
Software & Hardware Features
Software features
— Program Suspend and Resume: read other sectors
before programming operation is completed
— Erase Suspend and Resume: read/program other
sectors before an erase operation is completed
— Data# polling and toggle bits provide status
— Unlock Bypass Program command reduces overall
multiple-word programming time
— CFI (Common Flash Interface) compliant: allows host
system to identify and accommodate multiple flash
devices
Hardware features
— Advanced Sector Protection
— WP#/ACC input accelerates programming time
(when high voltage is applied) for greater throughput
during system production. Protects first or last sector
regardless of sector protection settings
— Hardware reset input (RESET#) resets device
— Ready/Busy# output (RY/BY#) detects program or
erase cycle completion
Publication Number S70GL01GN00_00 Revision A Amendment 2 Issue Date May 21, 2007
This document contains information on a product under development at Spansion LLC. The information is intended to help you evaluate this product. Spansion LLC
reserves the right to change or discontinue work on this proposed product without notice.
Share Link: 