MAX15102EWL データシートの表示（PDF） - Maxim Integrated

部品番号

コンポーネント説明

メーカー

MAX15102EWL

Small 2A, Low-Dropout Linear Regulator in a 2.7mm x 1.6mm Package

Maxim Integrated 

MAX15102

Small 2A, Low-Dropout Linear Regulator

in a 2.7mm x 1.6mm Package

Absolute Maximum Ratings

IN, SS_BYP, FB to GND ..........................................-0.3V to +6V

EN, PG, OUT to GND..................................-0.3V to (VIN + 0.3V)

OUT Short Circuit.......................................................Continuous

Continuous Power Dissipation (TA = +70NC)

WLP (derate 19.2mW/NC above +70NC).....................1538mW

Operating Temperature Range ....................... -40NC to +105NC

Storage Temperature Range .......................... -65NC to +150NC

Junction Temperature .....................................................+150NC

Soldering Temperature (reflow) (Note 1).........................+260NC

Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation

of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum

rating conditions for extended periods may affect device reliability.

Note 1: The WLP package is constructed using a unique set of package techniques that impose a limit on the thermal profile. The

device can be exposed during board-level solder attach and rework. This limit permits only the use of the solder profiles

recommended in the industry-standard specification JEDEC 020A, paragraph 7.6, Table 3 for IR/VPR and convection

reflow. Preheating is required. Hand or wave soldering is not allowed.

Package Information

15 WLP

Package Code

Outline Number

Land Pattern Number

THERMAL RESISTANCE, FOUR-LAYER BOARD

Junction to Ambient (θJA)

W151B2+1

21-0205

Refer to Application Note 1891

+30°C/W

Package thermal resistances were obtained using the method described in JEDEC specification JESD51-7, using a four-layer board.

For detailed information on package thermal considerations, refer to www.maximintegrated.com/thermal-tutorial.

For the latest package outline information and land patterns (footprints), go to www.maximintegrated.com/packages. Note that a “+”, “#”,

or “-” in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains

to the package regardless of RoHS status.

www.maximintegrated.com

Maxim Integrated │  2

Share Link: