VN750PEP-E
Table 1. General Features
Type
RDS(on)
IOUT
VN750PEP-E 60 mΩ
6A
VCC
36 V
HIGH SIDE DRIVER
Figure 1. Package
PRELIMINARY DATA
■ CMOS COMPATIBLE INPUT
■ ON STATE OPEN LOAD DETECTION
■ OFF STATE OPEN LOAD DETECTION
■ SHORTED LOAD PROTECTION
■ UNDERVOLTAGE AND OVERVOLTAGE
SHUTDOWN
■ PROTECTION AGAINST LOSS OF GROUND
■ VERY LOW STAND-BY CURRENT
■ REVERSE BATTERY PROTECTION (*)
■ IN COMPLIANCE WITH THE 2002/95/EC
EUROPEAN DIRECTIVE
PowerSSO-12
DESCRIPTION
The VN750PEP-E is a monolithic device designed
in STMicroelectronics VIPower M0-3 Technology,
intended for driving any kind of load with one side
connected to ground.
Active VCC pin voltage clamp protects the device
against low energy spikes (see ISO7637 transient
compatibility table).
Active current limitation combined with thermal
shutdown and automatic restart protect the device
against overload.
The device detects open load condition both is on
and off state. Output shorted to VCC is detected in
the off state. Device automatically turns off in case
of ground pin disconnection.
Table 2. Order Codes
Package
PowerSSO-12
Note: (*) See application schematic at page 9.
Tube
VN750PEP-E
Tape and Reel
VN750PEPTR-E
December 2004
Rev. 3
1/15
This is preliminary information on a new product foreseen to be developed. Details are subject to change without notice.