DATA SHEET
ORDERING INFORMATION
Standard Products
AMD standard products are available in several packages and operating ranges. The order number (Valid Combination) is
formed by a combination of the following:
Am29LV640D
Am29LV641D
H 90R E I N
OPTIONAL PROCESSING
Blank = Standard Processing
N = 32-byte ESN devices
(Contact an AMD representative for more information)
TEMPERATURE RANGE
I
= Industrial (–40°C to +85°C)
F = Industrial (–40°C to +85°C) with Pb-Free Package
PACKAGE TYPE
E = 48-Pin Thin Small Outline Package (TSOP) Standard Pinout (TS 048)
Z = 56-Pin Shrink Small Outline Package (SSO056)
PC = 64-Ball Fortified Ball Grid Array
1.0 mm pitch, 13 x 11 mm package (LAA064)
WH = 63-Ball Fine-Pitch Ball Grid Array
0.80 mm pitch, 11 x 12 mm package (FBE063)
SPEED OPTION
See Product Selector Guide and Valid Combinations
SECTOR ARCHITECTURE AND SECTOR WRITE PROTECTION (WP# = 0)
H = Uniform sector device, highest address sector protected
L = Uniform sector device, lowest address sector protected
U = Uniform sector device (WP# not available)
DEVICE NUMBER/DESCRIPTION
Am29LV640DU/DH/DL, Am29LV641DH/DL
64 Megabit (4 M x 16-Bit) CMOS Uniform Sector Flash Memory with VersatileIO™ Control
3.0 Volt-only Read, Program, and Erase
Valid Combinations for
TSOP and SSOP Packages
AM29LV640DH90R,
AM29LV640DL90R
ZI, ZF
Speed/VIO Range
90 ns,
AM29LV641DH90R,
AM29LV641DL90R
EI, FI, EF
VIO = 3.0 V – 5.0 V
AM29LV640DH120R,
AM29LV640DL120R
ZI, ZF
120 ns,
AM29LV641DH120R,
AM29LV641DL120R
EI, FI, EF
VIO = 3.0 V – 5.0 V
AM29LV640DH121R,
AM29LV640DL121R
ZI, ZF
120 ns,
AM29LV641DH121R,
AM29LV641DL121R
EI, FI, EF
VIO = 1.8 V – 2.9 V
Note: LV640/641DH & DL have WP#, but no RY/BY#. U designator
in base part number replaced by H or L.
Valid Combinations
Valid Combinations list configurations planned to be supported in vol-
ume for this device. Consult the local AMD sales office to confirm
availability of specific valid combinations and to check on newly re-
leased combinations.
Valid Combinations for BGA Packages
Order Number
Package Marking
AM29LV640DU90R
PCI,
PCF
L640DU90N
I, F
WHI,
WHF
L640DU90R
AM29LV640DU120R
AM29LV640DU121R
PCI,
PCF
L640DU12N
WHI,
WHF
L640DU12R
I, F
PCI,
PCF
L640DU21N
WHI,
WHF
L640DU21R
Note: LV640DU has RY/BY#, but no WP#.
Speed/
VIO Range
90 ns, VIO =
3.0 V – 5.0 V
120 ns, VIO =
3.0 V – 5.0 V
120 ns, VIO =
1.8 V – 2.9 V
Note: Reverse pinout TSOP (TSR048) packages are not Note: offered
for new designs. For 128 Mb requirements, the S29GL128N product is
recommended as a single-device substitute for the 64 Mb + 64 Mb
clamshell design; please refer to the S29GL128N data sheet for
specifications and ordering information.
January 22, 2007 22366C6
Am29LV640D/Am29LV641D
9