24AA65 データシートの表示（PDF） - Microchip Technology
部品番号
コンポーネント説明
メーカー
24AA65 Datasheet PDF : 24 Pages
| |||
24AA65/24LC65/24C65
1.0 ELECTRICAL CHARACTERISTICS
Absolute Maximum Ratings(†)
VCC............................................................................................................................................................................. 7.0V
All inputs and outputs w.r.t. VSS ..........................................................................................................-0.6V to VCC +1.0V
Storage temperature ...............................................................................................................................-65°C to +150°C
Ambient temperature with power applied................................................................................................-65°C to +125°C
ESD protection on all pins ......................................................................................................................................................≥ 4 kV
† NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the
device. This is a stress rating only and functional operation of the device at those or any other conditions above those
indicated in the operational listings of this specification is not implied. Exposure to maximum rating conditions for an
extended period of time may affect device reliability.
TABLE 1-1: DC CHARACTERISTICS
DC CHARACTERISTICS
VCC = +1.8V to +6.0V
Commercial (C): TA =
Industrial
(I): TA =
Automotive (E): TA =
0°C to +70°C
-40°C to +85°C
-40°C to +125°C
Parameter
Sym
Min
Max Units
Conditions
A0, A1, A2, SCL and SDA pins:
High-level input voltage
VIH
Low-level input voltage
VIL
Hysteresis of Schmitt Trigger inputs VHYS
Low-level output voltage
VOL
Input leakage current
ILI
Output leakage current
ILO
Pin capacitance
(all inputs/outputs)
CIN, COUT
Operating current
ICC Write
ICC Read
Standby current
ICCS
.7 VCC
—
.05 VCC
—
—
—
—
—
—
—
—
.3 VCC
—
.40
±1
±1
10
3
150
5
Note 1: This parameter is periodically sampled and not 100% tested.
V
V
V (Note 1)
V IOL = 3.0 mA
µA VIN = .1V to VCC
µA VOUT = .1V to VCC
pF VCC = 5.0V (Note 1)
TA = 25°C, FCLK = 1 MHz
mA VCC = 6.0V, SCL = 400 kHz
µA VCC = 6.0V, SCL = 400 kHz
µA VCC = 5.0V, SCL = SDA = VCC
A0, A1, A2 = VSS
FIGURE 1-1:
BUS TIMING START/STOP
VHYS
SCL
SDA
TSU:STA
THD:STA
TSU:STO
START
STOP
2003 Microchip Technology Inc.
DS21073J-page 3
Share Link: 