A65H83181P-6 データシートの表示（PDF） - AMIC Technology

部品番号

コンポーネント説明

メーカー

A65H83181P-6

128K x 36 & 256K x 18 Late Write Synchronous Fast SRAM with Pipelined Data Output

AMIC Technology 

A65H73361/A65H83181 Series

Absolute Maximum Ratings*

Power Supply Voltage(VDD) . . . . . . . . . . -0.5V to +4.6V

Voltage Relative to GND for any Pin Except VDD(VIN,

VOUT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5V

Power Dissipation (PD) . . . . . . . . .. . . . . . . . . . .. . .1.0W

Operating Temperature (Topr). . . . . . . . .. . 0°C to 70°C

Storage Temperature (Tbias) . . . . . . .. .. . -10°C to 85°C

Storage Temperature(Tstg). . . . . . . . . . .-55°C to 125°C

*Comments

Stresses above those listed under "Absolute Maximum

Ratings" may cause permanent damage to this device.

These are stress ratings only. Functional operation of

this device at these or any other conditions above those

indicated in the operational sections of this specification

is not implied and exposure the absolute maximum

rating conditions for extended periods may affect device

reliability.

Recommended DC Operating Conditions (TJ = 0 to 110°C)

Parameter

Symbol

Min.

Typ.

Max.

Units

Supply Voltage

VDD

3.15

3.3

3.47

V

Output Driver Supply Voltage

VDDQ

1.4

1.5

1.6

V

Input High Voltage

VIH

VREF+0.1

-

VDDQ+0.3

V

Input Low Voltage

VIL

-0.3

-

VREF-0.1

V

Input reference Voltage

VREF

0.68

0.75

0.90

V

Clocks Signal Voltage

VIN-CLK

-0.3

-

VDDQ+0.3

V

Differential Clocks Signal Voltage

VDIF-CLK

0.1

-

VDDQ+0.6

V

Clocks Common Mode Voltage

VCM-CLK

0.55

-

0.90

V

Output Current

IOUT

-

5

8

mA

1.All voltage reference to VSS. All VDD VDDQ and VSS pins must be connected.

2.VIH(Max)DC = VDD + 0.3V, VIH(Max)AC = VDD + 1.5V (pulse width ≤ 4.0ns).

3.VIL(Min)DC = -0.3V, VIL(Min)AC = -1.5 V (pulse width ≤ 4.0ns).

4.VIN-CLK specifies the maximum allowable DC excursions of each differential clock ( CK , CK ).

5.VDIF-CLK specifies the minimum clock differential voltage required for switching.

6.Peak to Peak AC component superimposed on VREF may not exceed 5% of VREF.

Notes

1

1

1, 2

1, 3

1, 6

1, 4

1, 5

1

PRELIMINARY (February, 1999, Version 2.0)

5

AMIC Technology, Inc.

Share Link: