33291L データシートの表示（PDF） - Freescale Semiconductor

部品番号

コンポーネント説明

メーカー

33291L

Eight-Output Switch with Serial Peripheral Interface I/O

Freescale Semiconductor 

ELECTRICAL CHARACTERISTICS

STATIC ELECTRICAL CHARACTERISTICS

STATIC ELECTRICAL CHARACTERISTICS

Table 4. Static Electrical Characteristics

Characteristics noted under conditions 4.5 V ≤ VDD ≤ 5.5 V, 9.0 V ≤ VPWR ≤ 16 V, -40°C ≤ TA ≤ 125°C, unless otherwise noted.

Typical values noted reflect the approximate value with VBAT = 13 V, TA = 25°C.

Characteristic

Symbol

Min

Typ

Max

Unit

POWER INPUT

Supply Voltage Range

Quasi-Functional (14)

Fully Operational

Supply Current (All Outputs ON, IOUT = 0.5 A)

Sleep State Supply Current at RST ≤ 0.2 VDD and/or VDD < 0.5 V

Sleep State Output Leakage Current (Per Output, RST = 0 V)

Overvoltage Shutdown

Overvoltage Shutdown Hysteresis (15)

Logic Supply Voltage

Logic Supply Current (16)

RST ≥ 0.7 VDD

RST ≤ 0.5 V

Logic Supply Undervoltage Lockout Threshold (17)

POWER OUTPUT

Drain-to-Source ON Resistance (IOUT = 0.5 A, TJ - 25°C)

VPWR = 5.5 V

VPWR = 9.0 V

VPWR = 13 V

Drain-to-Source ON Resistance (IOUT = 0.5 A, TJ - 150°C)

VPWR = 5.5 V

VPWR = 9.0 V

VPWR = 13 V

Output Self-Limiting Current

Outputs Programmed ON, VOUT = 0.6 VDD

Output Fault Detect Threshold (18)

Output Programmed OFF

Output OFF Open Load Detect Current (19)

Output Programmed OFF, VOUT = 0.6 VDD

VPWR(QF)

5.5

VPWR(FO)

9.0

VPWR(ON)

–

IPWR(ON)

–

IPWR(SS)

–

VOV

28

VOV(HYS)

0.2

VDD

4.5

IDD

–

–

VDD(UVLO)

2.5

RDS(ON)

–

–

–

RDS(ON)

–

–

–

IOUT(LIM)

1.0

VOUTth(F)

2.5

IOCO

30

V

–

9.0

–

26.5

1.0

2.0

mA

1.0

2.5

μA

1.0

2.5

μA

32

36

V

0.8

1.5

V

–

5.5

V

1.0

4.0

mA

–

25

μA

–

3.5

V

Ω

–

2.0

1.2

1.6

1.1

1.4

Ω

–

3.0

1.2

2.0

1.0

1.6

A

2.0

3.0

V

3.0

3.5

μA

50

100

Notes

14. SPI inputs and outputs operational. Fault status reporting may not be fully operational within this voltage range. Outputs remain

operational somewhat below this VPWR range, but RDS(ON) will increase, causing power dissipation to increase. Outputs will re-

establish their instructed state following a VPWR interruption as long as VDD remains non-interrupted.

15. This parameter is guaranteed by design, but it is not production tested.

16. Measured with the RST pin held at a logic high state. Outputs can be OFF or ON or in any combination thereof.

17. Device incorporates a power-ON reset function. For VDD less than the Undervoltage Lockout Threshold voltage, all data registers are

reset and all outputs are disabled.

18. Output Fault Detect Threshold with outputs programmed OFF. Output fault detect thresholds are the same for output opens and shorts.

19. Output OFF Open Load Detect Current is the current required to flow through the load for the purpose of detecting the existence of an

open load condition when the specific output is commanded to be OFF.

33291L

6

Analog Integrated Circuit Device Data

Freescale Semiconductor

Share Link: