SST29LE010-150-4I-PN データシートの表示（PDF） - Silicon Storage Technology

部品番号

コンポーネント説明

メーカー

SST29LE010-150-4I-PN

1 Mbit (128K x8) Page-Write EEPROM

Silicon Storage Technology 

Data Sheet

Please refer to the following Application Notes for more

information on using SDP:

• Protecting Against Unintentional Writes When

Using Single Power Supply Flash Memories

• The Proper Use of JEDEC Standard Software

Data Protection

Product Identification

The Product Identification mode identifies the device

as the SST29EE/VE010 and manufacturer as SST.

This mode is accessed via software. For details, see

Table 4, Figure 11 for the software ID entry and read

timing diagram and Figure 18, for the ID entry com-

mand sequence flowchart.

1 Mbit Page-Write EEPROM

SST29EE010 / SST29VE010

TABLE 1: PRODUCT IDENTIFICATION

Manufacturer’s ID

Device ID

SST29EE010

SST29VE010

Address

0000H

0001H

0001H

Data

BFH

07H

08H

T1.4 1061

Product Identification Mode Exit

In order to return to the standard Read mode, the Software

Product Identification mode must be exited. Exiting is

accomplished by issuing the Software ID Exit (reset) opera-

tion, which returns the device to the Read operation. The

Reset operation may also be used to reset the device to the

Read mode after an inadvertent transient condition that

apparently causes the device to behave abnormally, e.g.,

not read correctly. See Table 4 for software command

codes, Figure 12 for timing waveform, and Figure 18 for a

flowchart.

FUNCTIONAL BLOCK DIAGRAM

X-Decoder

A16 - A0

Address Buffer & Latches

CE#

OE#

WE#

Control Logic

SuperFlash

Memory

Y-Decoder and Page Latches

I/O Buffers and Data Latches

DQ7 - DQ0

1061 B1.0

©2005 Silicon Storage Technology, Inc.

4

S71061-11-000

9/05

Share Link: