56F8011 データシートの表示（PDF） - Freescale Semiconductor

部品番号

コンポーネント説明

メーカー

56F8011

16-bit Digital Signal Controllers

Freescale Semiconductor 

Version History

Rev. 0

Rev. 1

Rev. 2

Rev. 3

Rev. 4

Rev. 5

Rev. 6

Rev. 7

Document Revision History

Description of Change

Initial release.

Updates to Part 10, Specifications,

Table 10-1, added maximum clamp current, per pin

Table 10-12, clarified variation over temperature table and graph

Table 10-16, added LIN slave timing

Added alternate pins to Figure 11-1 and Table 11-1.

Corrected ADC offering on page 3, clarified Section 1.4.1, corrected bit selects in Timer

Channel 3 Input (TC3_INP) bit 9, Section 6.3.1.7, and simplified notes in Table 10-9.

Added clarification on sync inputs in Section 1.4.1, added voltage difference specification to

Table 10-1 and Table 10-4, deleted formula for Ambient Operating Temperature in

Table 10-4, also a note for pin group 3 to Table 10-1, corrected Table 8-1, error in Port C

peripheral function configuration, removed text from notes in Table 10-9 that referred to

multiple flash blocks - this family has one flash block. Added RoHs and “pb-free” language to

back cover.

Updates to Section 10

Table 10-5, corrected max values for ADC Input Current High and Low; corrected typ value

for pull-up disabled Digital Input Current Low (a)

Table 10-6, corrected typ and added max values for Standby > Stop and Powerdown modes

Table 10-7, corrected min value for Low-Voltage Interrupt for 3.3V

Table 10-11, corrected typ and max values and units for PLL lock time

Table 10-12, corrected typ values for Relaxation Oscillator output frequency and variation

over temperature (also increased temp range to 150 degreesC) and added variation over

temperature from 0—105 degreesC

Updated Figure 10-5

Table 10-19, updated max values for Integral Non-Linearity full input signal range, Negative

Differential Non-Linearity, ADC internal clock, Offset Voltage Internal Ref, Gain Error and

Offset Voltage External Ref; updated typ values for Negative Differential Non-Linearity, Offset

Voltage Internal Ref, Gain Error and Offset Voltage External Ref; added new min values and

corrected typ values for Signal-to-noise ratio, Total Harmonic Distortion, Spurious Free

Dynamic Range, Signal-to-noise plus distortion, Effective Number of Bits

Added details to Section 1. Clarified language in State During Reset column in Table 2-3;

corrected flash data retention temperature in Table 10-4; moved input current high/low

toTable 10-19 and location of footnotes in Table 10-5; reorganized Table 10-19; clarified title

of Figure 10-1.

Added information on automotive device for 56F8013.

Added information on 56F8011device; edited to indicate differences in 56F8013 and 56F8011

devices.

Updated values for VEI3.3 and VEI2.5 in Table 10-7.

Deleted values for input and output voltage in Table 10-8.

Added row for MC56F8013MFAE in Table 10-12.

56F8013/56F8011 Data Sheet, Rev. 12

2

Freescale Semiconductor

Share Link: