7157 データシートの表示（PDF） - Pomona Electronics

部品番号

コンポーネント説明

メーカー

7157

¼” Jacks W/Insulated Washer & Solder Lugs

Pomona Electronics 

Models 7156, 7157

¼” Jacks W/Insulated Washer & Solder Lugs

Model 7156 1/4” Phone Jack, Insulated Washers -Mono

Use to connect with standard

commercial phone plugs.

Features

• Stereo and mono versions

• Panel mountable

• Low contact resistance

Materials

• Body is diecast zinc alloy with tarnish resistant

nickel plating.

• Mounting bushing is nickel-plated copper alloy.

• Insulation: Rigid plastic.

• Springs: Copper alloy.

• Sleeve terminal: Copper alloy.

• Hardware includes one copper alloy nickel-plated

hex nut, and one steel nickel-plated washer.

Model 7157 1/4” Phone Jack, Insulated Washers-Stereo

Specifications

Number of conductors

Contact resistance

Dielectric strength

Insulation resistance

2 (7146), 3 (7157)

< 0.05 Ω

500 V dc

1000 MΩ

Maximum panel thickness: .25 inch (6.35 mm) for .375

inch (9.5 mm) long bushing.

Model 7156: 2-Conductor (mono), .205" Faston terminals

and .375" (9.5 mm) long bushing.

Model 7157: 3-Conductor (stereo), .375" long bushing.

Ordering Information

Model: 7156

Model: 7157

USA: Sales: 800-490-2361 Technical Support: 800-241-

2060 Fax: 888-403-3360

Europe: 31-(0) 40 2675 150 International: 425-446-5500

e-mail: technicalsupport@pomonatest.com

Where to Buy: www.pomonaelectronics.com

All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm),

.xxx = ± .005” (,127 mm). All specifications are to the latest revisions.

Specifications are subject to change without notice. Registered trademarks

are the property of their respective companies.

Copyright © 2004 2401702 D-ENG-N Rev A Page 1 of 1

Share Link: