74ABT541CMSA(2005) データシートの表示（PDF） - Fairchild Semiconductor

部品番号

コンポーネント説明

メーカー

74ABT541CMSA
(Rev.:2005)

Octal Buffer/Line Driver with 3-STATE Outputs

Fairchild Semiconductor 

Skew

(SOIC Package)

TA 40qC to 85qC

TA 40qC to 85qC

VCC 4.5V–5.5V

VCC 4.5V–5.5V

Symbol

Parameter

CL 50 pF

CL 250 pF

Units

8 Outputs Switching

8 Outputs Switching

(Note 12)

(Note 13)

Max

Max

tOSHL

(Note 14)

Pin to Pin Skew, HL Transitions

1.3

2.3

ns

tOSLH

(Note 14)

Pin to Pin Skew, LH Transitions

1.0

1.8

ns

tPS

(Note 15)

Duty Cycle, LH/HL Skew

2.0

3.5

ns

tOST

(Note 14)

Pin to Pin Skew, LH/HL Transitions

2.0

3.5

ns

tPV

Device to Device Skew, LH/HL Transitions

2.0

(Note 16)

3.5

ns

Note 12: This specification is guaranteed but not tested. The limits apply to propagation delays for all paths described switching in phase

(i.e., all LOW-to-HIGH, HIGH-to-LOW, etc.)

Note 13: These specifications guaranteed but not tested. The limits represent propagation delays with 250 pF load capacitors in place of the 50 pF load

capacitors in the standard AC load.

Note 14: Skew is defined as the absolute value of the difference between the actual propagation delays for any two separate outputs of the same device.

The specification applies to any outputs switching HIGH-to-LOW (tOSHL), LOW-to-HIGH (tOSLH), or any combination switching LOW-to-HIGH and/or HIGH-

to-LOW (tOST). The specification is guaranteed but not tested.

Note 15: This describes the difference between the delay of the LOW-to-HIGH and the HIGH-to-LOW transition on the same pin. It is measured across all

the outputs (drivers) on the same chip, the worst (largest delta) number is the guaranteed specification. This specification is guaranteed but not tested.

Note 16: Propagation delay variation for a given set of conditions (i.e., temperature and VCC) from device to device. This specification is guaranteed but not

tested.

Capacitance

Symbol

Parameter

Typ

CIN

Input Capacitance

COUT (Note 17) Output Capacitance

Note 17: COUT is measured at frequency of f

5.0

9.0

1 MHz, per MIL-STD-883, Method 3012.

Units

pF

pF

Conditions

TA 25qC

VCC 0.0V

VCC 5.0V

www.fairchildsemi.com

4

Share Link: