74F199 データシートの表示（PDF） - Philips Electronics
部品番号
コンポーネント説明
メーカー
74F199 Datasheet PDF : 8 Pages
| |||
Philips Semiconductors FAST Products
8-bit parallel-access shift register
Product specification
74F199
DC ELECTRICAL CHARACTERISTICS
(Over recommended operating free-air temperature range unless otherwise noted.)
SYMBOL
PARAMETER
TEST CONDITIONS1
LIMITS
MIN TYP2 MAX
UNIT
VOH
High-level output voltage
VCC = MIN, VIL = MAX ±10%VCC
2.5
V
VIH = MIN, IOH = MAX ±5%VCC
2.7
3.4
VOL
Low-level output voltage
VCC = MIN, VIL = MAX ±10%VCC
VIH = MIN, IOL = MAX ±5%VCC
0.35 0.50
V
0.35 0.50
VIK
Input clamp voltage
VCC = MIN, II = IIK
–0.73 –1.2
V
II
Input current at maximum input voltage
VCC = MAX, VI = 7.0V
100
µA
IIH
High-level input current
VCC = MAX, VI = 2.7V
20
µA
IIL
Low-level input current
VCC = MAX, VI = 0.5V
–0.6
mA
IOS
Short-circuit output current3
VCC = MAX
–60
–150
mA
ICC
Supply current (total)
ICCH
ICCL
VCC = MAX
65
90
mA
75
105
NOTES:
1. For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions for the applicable type.
2. All typical values are at VCC = 5V, Tamb = 25°C.
3. Not more than one output should be shorted at a time. For testing IOS, the use of high-speed test apparatus and/or sample-and-hold
techniques are preferable in order to minimize internal heating and more accurately reflect operational values. Otherwise, prolonged shorting
of a High output may raise the chip temperature well above normal and thereby cause invalid readings in other parameter tests. In any
sequence of parameter tests, IOS tests should be performed last.
June 15, 1988
5
Share Link: 