NXP Semiconductors
74LVC3G14
Triple inverting Schmitt trigger with 5 V tolerant input
12. Dynamic characteristics
Table 9. Dynamic characteristics
Voltages are referenced to GND (ground = 0 V). For test circuit see Figure 9.
Symbol Parameter
Conditions
−40 °C to +85 °C
Min Typ[1] Max
tpd
propagation delay nA to nY; see Figure 8
[2]
VCC = 1.65 V to 1.95 V
1.0
4.2
11.0
VCC = 2.3 V to 2.7 V
0.5
3.0
6.5
VCC = 2.7 V
0.5
3.8
7.0
VCC = 3.0 V to 3.6 V
0.5
3.2
6.0
VCC = 4.5 V to 5.5 V
0.5
2.4
4.3
CPD
power dissipation VI = GND to VCC; VCC = 3.3 V [3]
-
18.1
-
capacitance
−40 °C to +125 °C Unit
Min
Max
1.0
12.0 ns
0.5
7.2 ns
0.5
7.7 ns
0.5
6.7 ns
0.5
4.7 ns
-
- pF
[1] Typical values are measured at Tamb = 25 °C and VCC = 1.8 V, 2.5 V, 2.7 V, 3.3 V and 5.0 V respectively.
[2] tpd is the same as tPLH and tPHL.
[3] CPD is used to determine the dynamic power dissipation (PD in µW).
PD = CPD × VCC2 × fi × N + ∑(CL × VCC2 × fo) where:
fi = input frequency in MHz;
fo = output frequency in MHz;
CL = output load capacitance in pF;
VCC = supply voltage in V;
N = number of inputs switching;
∑(CL × VCC2 × fo) = sum of outputs.
13. Waveforms
VI
nA input
GND
VOH
nY output
VOL
VM
t PHL
VM
VM
t PLH
VM
mna344
Measurement points are given in Table 10. VOL and VOH are typical output voltage levels that occur with the output load.
Fig 8. The data input (nA) to output (nY) propagation delays
74LVC3G14_7
Product data sheet
Rev. 07 — 12 June 2008
© NXP B.V. 2008. All rights reserved.
7 of 18