A67L0636 データシートの表示（PDF） - AMIC Technology
部品番号
コンポーネント説明
メーカー
A67L0636 Datasheet PDF : 18 Pages
| |||
A67L1618/A67L0636 Series
Pin Description (continued)
Pin No.
LQFP (X18)
LQFP (X36)
64
64
Symbol
ZZ
88
88
R/ W
74, 73, 72, 69, 68,
63, 62, 59, 58,
24, 23, 22, 19, 18
13, 12, 9, 8
31
51, 52, 53, 56, 57,
58, 59, 62, 63
68, 69, 72, 73, 74,
75, 78, 79, 80
1, 2, 3, 6, 7, 8, 9,
12, 13,
18, 19, 22, 23, 24,
25, 28, 29, 30
31
I/Oa
I/Ob
I/Oc
I/Od
MODE
1, 2, 3, 6, 7, 25, 28,
29, 30, 38, 39, 42,
51, 52, 53, 56, 57,
75, 78, 79, 95, 96
15, 41, 65, 91
38,39,42
15, 41, 65, 91
14, 16, 66
14, 16, 66
NC
VCC
VCC
4, 11, 20, 27,
54, 61, 70, 77
17, 40, 90
5,10,21,26,
55,60,71,76
4, 11, 20, 27, 54,
61, 70, 77
17, 40, 90
5,10,21,26,
55,60,71,76
VCCQ
VSS
VSSQ
Description
Snooze Enable : This active high asynchronous input causes the
device to enter a low-power standby mode in which all data in the
memory array is retained. When active, all other inputs are
ignored.
Read/Write : This active input determines the cycle type when
ADV/LD is LOW. This is the only means for determining READs
and WRITEs. READ cycles may not be converted into WRITEs
(and vice versa) other than by loading a new address. A LOW on
this pin permits BYTE WRITE operations and must meet the setup
and hold times around the rising edge of CLK. Full bus width
WRITEs occur if all byte write enables are LOW.
SRAM Data I/O : Byte “a” is I/Oa pins; Byte “b” is I/Ob pins; Byte
“c” is I/Oc pins; Byte “d” is I/Od pins. Input data must meet setup
and hold times around CLK rising edge.
Mode : This input selects the burst sequence. A LOW on this pin
selects linear burst. NC or HIGH on this pin selects interleaved
burst. Do not alter input state while device is operating.
No Connect : These pins can be left floating or connected to GND
to minimize thermal impedance.
Power Supply : See DC Electrical Characteristics and Operating
Conditions for range.
These pins do not have to be connected directly to VCC as long
as the input voltage is ≥ VIH. This input is not connected to VCC
bus internally.
Isolated Output Buffer Supply : See DC Electrical Characteristics
and Operating Conditions for range.
Ground : GND.
Isolated Output Buffer Ground
PRELIMINARY (March, 2005, Version 0.1)
7
AMIC Technology, Corp.
Share Link: 