ACPL-072L データシートの表示（PDF） - Avago Technologies
部品番号
コンポーネント説明
メーカー
ACPL-072L Datasheet PDF : 11 Pages
| |||
Table 6. Switching Specifications
Test conditions that are not specified can be anywhere within the recommended operating range.
The following specifications cover the following power supply combinations: (4.5V≤VDD1≤5.5V, 4.5V≤VDD2≤5.5V),
(3V≤VDD1≤3.6V, 3V≤VDD2≤3.6V), (4.5V≤VDD1≤5.5V, 3V≤VDD2≤3.6V) and (3V≤VDD1≤3.6V, 4.5V≤VDD2≤5.5V).
All typical specifications are at TA=+25°C, VDD1 = VDD2 = +3.3V.
Parameter
Propogation Delay Time
to Logic Low Output [3]
Propogation Delay Time
to Logic High Output [3]
Pulse Width [4]
Maximum Data Rate [5]
Pulse Width Distortion [6]
| tPHL - tPLH |
Propagation Delay Skew [7]
Output Rise Time
(10% – 90%)
Output Fall Time
(90% - 10%)
Common Mode Transient
Immunity at Logic High Output [8]
Common Mode Transient
Immunity at Logic Low Output [8]
Symbol Min.
tPHL
tPLH
tPW
40
|PWD |
tPSK
tR
tF
| CMH | 10
| CML | 10
Typ. Max. Units Test Conditions
23.5 40
ns
CL = 15 pF, CMOS Signal Levels
25.5 40
ns
CL = 15 pF, CMOS Signal Levels
ns
CL = 15 pF, CMOS Signal Levels
25
MBd CL = 15 pF, CMOS Signal Levels
2
6
ns
CL = 15 pF, CMOS Signal Levels
20
ns
CL = 15 pF, CMOS Signal Levels
9
ns
CL = 15 pF, CMOS Signal Levels
8
ns
CL = 15 pF, CMOS Signal Levels
20
kV/ms VCM = 1000 V, TA = 25°C,
VI = VDD1, VO > 0.8 VDD1
20
kV/ms VCM = 1000 V, TA = 25°C,
VI = 0 V, VO < 0.8 V
Table 7. Package Characteristics
All typical specifications are at TA = 25°C.
Parameters
Input-Output Momentary
With-stand Voltage [7,8,9]
Input-Output Resistance [9]
Input-Output Capacitance
Input Capacitance [12]
Input IC Junction-to-Case
Thermal Resistance
Output IC Junction-to-Case
Thermal Resistance
Package Power Dissipation
Symbol Min. Typ. Max. Units Test Conditions
072L
772L
VISO
3750
3750
V rms RH ≤ 50%, t = 1 min, TA = 25°C
772L with
020 option
5000
R I-O
C I-O
CI
772L
qjci
072L
1012
W
V I-O = 500 V dc
0.6
pF f = 1 MHz
3.0
pF
145
°C/W Thermocouple located at center
160
underside of package
772L
qjco
140
°C/W
072L
135
PPD
150 mW
Notes:
1. Absolute Maximum ambient operating temperature means the device will not be damaged if operated under these conditions. It does not
guarantee functionality.
2. The LED is ON when VI is low and OFF when VI is high.
3. tPHL propagation delay is measured from the 50% level on the falling edge of the VI signal to the 50% level of the falling edge of the VO signal. tPLH
propagation delay is measured from the 50% level on the rising edge of the VI signal to the 50% level of the rising edge of the VO signal.
4. The minimum pulse width is the shortest pulse width at which the specified pulse width distortion is guaranteed.
5. The maximum data rate is the fastest data rate at which the specified pulse width distortion is guaranteed.
6. PWD is defined as |tPHL - tPLH|. %PWD (percent pulse width distortion) is equal to the PWD divided by pulse width.
7. tPSK is equal to the magnitude of the worst case difference in tPHL and/or tPLH that will be seen between units at any given temperature within the
recommended operating conditions.
8
Share Link: 